Advertisement
Quick Links
Advertisement
Related Manuals for CDP CDP-001F
Summary of Contents for CDP CDP-001F
- Page 1 MANUAL Drowsiness and Distraction Detector CDP-001F 1 of 9...
- Page 2 The drowsiness and distraction monitor CDP-001F is a simple and effective detection device that identifies danger immediately. Warnings include powerful sound alerts and LED lights.
- Page 3 2. Specifications and features 2.1 Product appearance and interface description 1. Camera (with front view and adjustable angle) 2. Warning indicator light 3. Power indicator light 4. Speaker 5. USB, power connector 2.2 Product Specifications Specification Standard Operating range Voltage 4.75 ~ 5.25V Consumption 0.4 A...
- Page 4 3. Description of features 3.1 Alarm function Inspection Description Sound Device alerts when it Closing eye (according Beep detects that the driver to The P80 standard) sound 1 closes his eyes. Device alerts when it Closing eye with UV Beep detects that the driver sunglasses sound 1...
- Page 5 4. Installation and test Select the placement of the device according to the driver's height and posture. Perform the tests in section 4.2 before attaching it to the dashboard. It is very important a good placement for proper operation, test at various sites and distances until you find the best location for your vehicle.
- Page 6 Example in a Toyota Land Cruiser and BMW series 5 4.2 Testing the alarm function (1) Start-up test: Connect the device. After a few seconds you will hear "Ready" and the green and red LEDs will remain on. This means that the device has been successfully activated (2) Closing eyes test: Close your eyes for about 1-2 seconds, and you'll hear a beep sound.
- Page 7 5. Attention 1. Make sure the device does not interfere with the driver's field of vision. 2. When wearing anti-infrared sunglasses, with IR cut or overly opaque lens, the device will not be able to identify the pupils and it will not work. Normally, the device is capable of working with category 0, 1, or 2 lens.
-
Page 8: Troubleshooting
6. Troubleshooting Problem Possible reason Solution Does not start The device is turned off. Make sure the power is connected correctly. 1. Make an open palm gesture to turn on the The red indicator is off. device. 2. Reconnect the device. The driver's face is not within the viewing range of the Adjust the camera's mounting position or angle. - Page 9 8. Contact data C.D.PRODUCTS S.A. Polígono P-29 Calle Kanna, 2 – Local 3 28400 Collado Villalba – Madrid Customer service: 902 10 40 60 Email: clientes@cdproducts-spain.com 9 of 9...