Advertisement
Quick Links
MOBILE AND FIXED RADAR DETECTOR KAZA DT110 LIVE +
ANTENNA DT450 (OPTIONAL)
EUROPEAN MODEL – Default settings for SPAIN
1. Introduction
Thank you for purchasing the Mobile and Fixed Radar Detector KAZA DT110 LIVE + ANTENNA DT450
(OPTIONAL).
The KAZA DT110 LIVE + ANTENNA DT450 (OPTIONAL) Radar Detector uses the most advanced GPS
technology and new detector digital channel antenna. It has been specifically designed and
developed for the Spanish market, optimizing its sensitivity to detect mobile radars; it works with a
verified and efficient database to detect fixed radar warnings, for the exclusive use of KAZA DT110
LIVE + ANTENNA DT450 (OPTIONAL) owners.
If you use a SIM with Internet connection, you will have the updated database at all times, as well as
connection to the LIVE Community with warnings in real time by other users.
Connecting to the LIVE Community cloud (www.kazalive.com) entails a third protection shield, since
you will be able to receive warnings in real time reported by KAZA users. You will receive warnings
regarding: hidden mobile radars, PEGASUS helicopter sightings, accidents, traffic jams, etc.
This exclusive and innovative interactive technology between your KAZA and the LIVE Community
will allow you to inform and to be informed in real time, allowing you to anticipate possible road risks.
Its connectivity features will also allow you to automatically update the database of your KAZA
without requiring complex downloads.
The new KAZA DT 110 LIVE + ANTENNA DT450 (OPTIONAL) is not a normal detector or warning unit, it is
a device that receives and transmits input from thousands of KAZA users in real time.
Do not use the KAZA DT110 LIVE + ANTENNA DT450 (OPTIONAL) unit to avoid speed limit controls, but
rather to promote safer driving conditions. The device will remind you of the limits that should be
complied with at all times, aiding you to avoid mistakes or blunders that may lead to accidents or
speeding fines.
Don't handle the unit while driving, since this may lead to distractions, deviating your attention from
the road.
IMPORTANT NOTICE:
The device is solely a GPS warning unit that is completely legal. The detector is optional and is a
piece of equipment that is sold separately.
To connect the GPS to the detector (optional), press the "R" key during 3 seconds as soon as you
turn on the unit until you hear "Consult the legislation in your country, radar activated". At this time,
the yellow star in the center of the compass will turn on. Now your device works as GPS warning unit
and radar detector.
Don't forget to check the legislation in your country with regard to the detector!
1
Advertisement
Related Manuals for CDP KAZA DT110 LIVE
Summary of Contents for CDP KAZA DT110 LIVE
- Page 1 KAZA users in real time. Do not use the KAZA DT110 LIVE + ANTENNA DT450 (OPTIONAL) unit to avoid speed limit controls, but rather to promote safer driving conditions. The device will remind you of the limits that should be complied with at all times, aiding you to avoid mistakes or blunders that may lead to accidents or speeding fines.
- Page 2 This is known as Doppler Effect. The only way of detecting these radar emissions is through a radar detector like KAZA DT110 LIVE + ANTENNA DT450 (OPTIONAL).
- Page 3 The fixed Autovelox (photo 3) are cross-laser type (CANNOT BE DETECTED THROUGH ANY SYSTEM) and will therefore be announced sufficiently in advance by means of the GPS warning unit. (Photo 3) Other radars that don't emit wavelengths and will only be announced by the GPS warning unit include induction and tract control radars: The induction-loop radars are cables located under the asphalt that calculate the speed of the vehicle when it passes over them;...
- Page 4 34.3 and 35.5 Ghz and Multa Radar CD/CT. In Spain, KA band and Multa radar CD/CT are used for both fixed and mobile radars. In the KAZA CDP DT 450 MTR model, these bands are the factory setting. See examples (photo 6). (Photo 6) RADARS NOT DETECTED BY ANY ANTI-RADAR UNIT.
- Page 5 Important warning: At times, the antenna of your detector won't produce any alarm when you pass by a radar. This could be due to the following reasons: 1. The radar is off. 2. The radar is damaged (see photo 6). 3.
- Page 6 Make sure that nothing blocks the field of vision of the antenna and that it is correctly connected. Also check there are no radar interferences memories recorded by mistake. Try deleting the radar interferences memory. The radars might not always be in operation. Keep in mind that they are connected and disconnected periodically.
- Page 7 It will warn you of: Fixed Radars and Dangerous Points. 16. Possibility of informing the Cloud of traffic disturbances. Box content: KAZA DT110 LIVE + ANTENNA DT450 (OPTIONAL) warning unit. Car adapter 12V -24V DC with GSM/GPRS modem. ...
- Page 8 In the car: 1. Connect the adapter cable to the car lighter and to the unit. 2. Fasten the detector through one of the methods supplied. An incorrect placement considerably reduces the GPS coverage. 3. By default, the detector is off and the yellow star in the center of the compass is also off. The GPS is activated and fully functional, and the device will work as a GPS warning unit.
- Page 9 When it is on, it means there is a connection between the antenna and the warning unit, and the antenna is connected. If it flashes, it means the antenna is off, on stand-by because you are driving at less than 20Km/h and a speed was selected in “Radar alert sound setup”. If it is not flashing, the detector is connected and scanning frequencies.
- Page 10 8. Programming and menu options. Adjust Volume Press the “+ or -” key briefly to change the intensity of the volume. Every time you press “+ or -”, the screen will show numbers from 1 to 5 in circular form. Turning the detector antenna on and off By default, the detector is turned off and the yellow star in the center of the compass is also turned off.
- Page 11 “M” key menu Every time you press the “M” key, you will go to one of the menu options 1 to 11. In this option, the "+ or –" key is generally used to choose the options. Menu 1: Selecting the warning mode of the GPS Press the “M”...
- Page 12 Menu 3: Adjust cruising speed Press the “M” key. You will hear “Selection of the cruising speed limit ", press the “+ or -” key to turn it off or to set the speed limit from 30 to 160. When your vehicle exceeds the selected speed, your device will issue the warning “you are exceeding the speed limit”.
- Page 13 Press the “M” key fifteen times. You will hear “Factory settings". Press the “OK” key to return to the factory settings and the detector antenna will return to its disconnected state, transforming the device into a simple GPS warning unit. •...
- Page 14 Mobile telephony repeaters, data radio-links. These repeaters emit in frequencies whose harmonics may coincide with the KA band. The KAZA detector includes a filter by software to delimit the KA band to 34.3 Ghz and 35.5 Ghz, but sometimes the harmonic coincides and produces a false alarm.
- Page 15 When you are registered and your account is activated by email, go to http://www.kazaradares.com again and enter your user name and password. You will then see the following screen.
- Page 16 Download the program the first time and the database every time you wish to update. Copy them on your PC. Execute the update program: Connect the GPS to the USB cable supplied and wait until the program detects it. The buttons that were disabled will be activated and the form’s header will show the message “GPS connected”...
- Page 17 Disconnect the GPS and close the program. Note: To change voices to another language, follow the same process, but download the corresponding voice file and database file. OPCION 2 You can also use the "AutoUpdate" program, easier, if you have to enter the web and automatic. When you connect the unit to the PC, it will appear as if it were an external hard drive ...
- Page 18 The program will first download the internet database, then it will update the device, so do not disconnect it in any of the two downloads it does. 12. Time adjustments, band frequencies, screen brightness and display or non-display the frequency detected.
- Page 19 Select the operator and choose OK. If your operator is not on the list, select "Others" and fill out the data pertaining to your internet connection. If you don’t know this information, ask your mobile telephone operator to inform you of the APN, user, and password.
-
Page 20: Important Note
14. Contact data. C.D.Products S.A. Calle Kanna 2, local 3 Polígono Industrial P-29. 28400 Collado Villalba – Madrid. www.cdpsa.es www.kazaradares.com email: clientes@cdpsa.es Technical specifications of the KAZA DT 110 LIVE + ANTENA DT450 (OPTIONAL) Operating frequencies (if you have the DT450 optional antenna): Band Ka 34.300, 34,700, 35.500 GHz ±...