Advertisement
Quick Links
Lites
HPLED II C6 colour
RGBACL
Owner's and service manual
Read this manual totally and carefully follow all the instructions contained. File this
manual for future use
It is essential to read all the information contained to ensure correct installation,
service and full operation of the HPLED
All operations must be accomplished, handled and carried out by qualified personnel
only
NOT COMPLYNIG WITH GIVEN NOTICE IT WILL VOID WARRANTY AND WILL FREE THE
MANUFACTURER OF ANY KIND OF RESPONSABILITY AND LIABILITY.
www.litessrl.com
Advertisement
Related Manuals for Lites HPLED II C6 colour
Summary of Contents for Lites HPLED II C6 colour
- Page 1 Lites HPLED II C6 colour RGBACL Owner's and service manual Read this manual totally and carefully follow all the instructions contained. File this manual for future use It is essential to read all the information contained to ensure correct installation,...
-
Page 2: Warranty
Unpacking Unpack the carton and gently remove from the box. Ensure is received in all its parts. HPLED II C6 HPLED II C6 In the event the HPLED II C6 shows any damage, do not use it and contact immediately your transporter as well as your seller Items in the carton consist of: HPLED II C6 Module... - Page 3 Technical specifications Power Supply 100-240 V~ 50/60Hz Maximum power consumption 175W Stand-by power consumption 3W Minimum ambient temperature -10°C Maximum ambient temperature 35°C LED Colour RGBACL: Red; green; blue; amber; cyan; lime 30 colored presets 10 Preset bianchi da 2.300°K a 10.000°k Minimun CRI LED CRI: : 93>...
- Page 4 HPLED C 5 installation HPLED II C6 has been designed to be installed in any original “ETC source 4” fixtures. Some parts of the existing “ETC Source 4” fixture must be removed to lodge the module in Course of actions: Disconnect any kind of power/source from any item being handled, that could cause electric shock Loosen knobs that hold front lens assembly, remove it and place it aside in a safe place...
- Page 5 Fig.4 Fig.5 Fig.6 Connection to mains WARNING ! Installation(s) must be accomplished, handled and carried out by qualified personnel only and must comply with all norms in force in the installation's country HPLED II C6 is supplied with a free-Blue Neutrik PowerCon plug that must be wired using a 3x1.5mm² lead which additional specifications include: Operating Voltage: 300/500V Test Voltage: 2KV...
- Page 6 (Controller sets the device in a listing to read: settings, DMX address, personality settings, (Read all DMX mode including all DMX channels above) ON/OFF ”Identify”: This mode is used to identify the manufacturer’s device (Lites srl). It gives a flash of light from the LED Model information (HPLED II-C6) Software version information (HPLEDII –C6 v.x.xx)
- Page 7 Menu items Allowed or Displayed displayed Function Message values Addr 001..512 Set Up DMX Address co01 Preset 1 red co02 Preset 2 light red co03 Preset 3 orange co04 Preset 4 medium amber co05 Preset 5 amber co06 Preset 6 straw tint co07 Preset 7 pale yellow It’s possible to select 30 colored...
- Page 8 The Master Mode uses the same settings as the Auto Menu. The only exception is that when all fixtures are connected to DMX 001 in daisy- MASL Master Mode chain, they perform the same presets and or the same presets selected on the Master fixture.
-
Page 9: Color Selection
mode 12 ch RGBACL (default) Function Dmx levels 0..255 From 0 to max 255 0..255 From 0 to max 255 green 0..255 From 0 to max 255 blue 0..255 From 0 to max 255 amber cyan 0..255 From 0 to max 255 lime 0..255 From 0 to max 255... - Page 10 mode 2 ch 0…15 No color 16…20 21…25 light red 26…30 orange 31…35 medium amber 36…40 amber 41…45 straw tint 46…50 pale yellow 51…55 spring yellow 56…60 yellow 61…65 lemon yellow 66…70 lime 71…75 lime green 76…80 green 81…85 moss green 86…90 light cyan 91…95...
- Page 11 mode 16 ch RGBACL 16 bit Function dmx levels 0..255 From 0 to max 255 Red fine 0..255 Red fine tune adjustment green 0..255 From 0 to max 255 Green fine 0..255 Green fine tune adjustment blue 0..255 From 0 to max 255 Blue fine 0..255 Blue fine tune adjustment...
-
Page 12: Error Messages
mode 6.HSI STUDIO 6 ch Hue selection, following levels 0..255 R, R+L, R+G+L, G+L,G, G+C,G+B+C, B+C, B B+A, R+B+A, R+A, R Color saturation with set color in the Hue channel Saturation 0..255 From 0 to max 255 Dimmer 0..255 Strobe disingaged 0…15 strobo Strobo from slow (16) to fast (255)