Advertisement
Quick Links
Lites
Lites F200 T Zoom
(Tunable)
Owners 's & Service manual
Read this manual totally and carefully follow all the instructions contained. File this manual for future
use. It is essential to read all the information contained to ensure installation, service and full operation
of the LitesF200.
All operations must be accomplished, handled and carried out by qualified personnel only. Not complying
with given notice will void warranty and will free manufufacturer from any liability/responsability
www.litessrl.com
Advertisement
Related Manuals for Lites F200 T Zoom
Summary of Contents for Lites F200 T Zoom
- Page 1 Lites Lites F200 T Zoom (Tunable) Owners ‘s & Service manual Read this manual totally and carefully follow all the instructions contained. File this manual for future use. It is essential to read all the information contained to ensure installation, service and full operation of the LitesF200.
-
Page 2: Warranty
Unpack the carton and gently remove Lites F200 from the box. Ensure Lites F200 received is integer from origin in all its components. In the event the Lites F200 shows any damage, do not use it and contact immediately your transporter as well as your seller. - Page 3 +60°C Weight of the unit: Kg 6,9 Worm-gear beam adjustment on standard Lites200F/ Automatic zoom on Lites F200Zoom Rear handle for good grip of unit ; side-lock on mounting yoke to adjust and set unit to position. Beam angle: 20°-60°...
- Page 4 Lirtes F200 is delivered with a robust yoke which hosts 3 x 12 mm mounting holes The use of an adequate G-clamp to sustain at least twice the weight of the Lites200F (Lites F200 weighs 6,9 kg) and/or M10 screw is mandatory. The use of safety chain(s) to sustain twice the weight of the Lites F200 is also mandatory, the safety chain adds more protections to users and third-parties.
- Page 5 WARNING ! Installation(s) must be accomplished, handled and carried out by qualified personnel only and must comply with all norms in force in the installation's country Lites F200 is supplied with a free Blue Neutrik PowerCon plug that must be wired using a 3x1.5mm² lead; additional specifications include: Operating Voltage: 300/500V ‒...
- Page 6 Signal Control Connection Lites F200 can be operated via either DMX512A and or RDM ready . For dasy chain connection use a -2 x 0,5 mm² size lead wire plus shield. Connect Pin 1 to ground, 2= data – while Pin 3 = data +. Pins 4 & 5 are not connected.
- Page 7 drUt ..°C Shows driver operating temperature LEdt ..°C Show led operating temperature 0..100% Shows current led power (0-100%) FAST SMOO DMX data Speed adjustment SLOW Dimmer profile selection: LInE GAMM - LinE for linear dimming regulation qUAd - qUAd for tungsten lamp emulation) FREQ LED operation frequence Boost selection:...
- Page 8 Remove dust from lenses using a clean cloth. This maintenance will ensure the maximum light efficiency Replace damaged protection screens and lenses when necessary Always handle Lites F200 gently and with care, do not drop, do not shake do not cause shocks to the unit as it could damage it irremediably.