Chevrolet Trailblazer 2020 Owner's Manual page 129

Chevrolet Trailblazer Owner Manual (GMNA-Localizing-SE Asia/CenAmer/
Carib-13517615) - 2020 - CRC - 3/22/19
manual control, the dialog will
progress in the same way as if the
selection was made through a voice
command. Once the system is able
to complete the task, or the session
is terminated, the voice recognition
dialog stops.
An example of this type of manual
intervention is touching on an entry
of a displayed number list instead of
speaking the number associated
with the entry desired.
Canceling Voice Recognition
Touch the Home screen button.
Pressing this button will
terminate a voice recognition
session which was initiated by
pressing the button on the radio
touchscreen.
Touch or say Cancel or Exit
to terminate the voice
recognition session and display
the screen from which voice
recognition was initiated.
i
Press on the steering wheel
controls to terminate the voice
session and display the screen
from which voice recognition
was initiated.
Helpful Hints for Speaking
Commands
Voice recognition can understand
commands that are either naturally
stated in sentence form, or direct
commands that state the application
and the task.
Most languages do not support
natural language commands in
sentence form. For those
languages, use direct commands
like the examples shown on the
display.
For best results:
Listen for the prompt and wait
for the beep before saying a
command or reply.
Say Help or look at the screen
display for example commands.
Infotainment System
A voice recognition system
prompt can be interrupted while
g
it is playing by pressing
For example, if the prompt
seems to be taking too long to
finish, to speak the command
without waiting for the prompt to
g
complete, press .
Speak the command naturally,
not too fast, not too slow. Use
direct commands without a lot of
extra words.
Usually Phone and Audio
commands can be spoken in a
single command.
For example say, Call Dave
Smith at work, Play followed
by the artist or song name,
or Tune followed by the radio
station number.
Navigation destinations are too
complex for a single command.
First, say a command that
explains the type of destination
needed, such as I want
directions to an Address,
Navigate to an intersection, I
129
.