Related Manuals for ELCOM TLM 1500
Summary of Contents for ELCOM TLM 1500
- Page 1 Modular transfer system TLM 1500 User manual & Maintenance guide Translation of the original manual, version 03 I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500...
-
Page 2: Table Of Contents
Responsability ..........................16 Customer service ........................... 16 Appendix ............................17 Maintenance schedule ......................17 Quality and environmental commitment: ISO certifications ..........18 List of part..........................18 I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500... -
Page 3: Version Tracking
2015 edition of ISO 9001 and 14001 19/09/18 S. MAIRET S. MAIRET standards: deletion of expired certificates 09/07/19 Addition of paragraph 8.3: List of parts G. DAURIANNES L. HERBIET I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500... -
Page 4: General Information
They are intended to be incorporated the customers' production line. 1.4 Conditions of use The elements of the TLM 1500 transfer systems are suited for a use in normal industrial areas such as a final assembly plant or equivalent, in a dry environment. -
Page 5: Safety Instructions
If you wish to use the transfer system in any other conditions, please do not hesitate to contact us. Other information is available on our website, in the documentation section: http://elcom-automation.com/transfers/documentation I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500 Page 2 sur 22... -
Page 6: Technical Specifications
- Weight of each part: See our catalogue Modular Transfer System & Flat belt conveyors. http://elcom-automation.com/transfers/documentation Warning: All load exceedance can lead to a premature wear of the belt or any other parts. I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500 Page 3 sur 22... -
Page 7: Commissioning
Therefore, they must be well protected on the end-user machine in order to avoid any risk of pinching or squashing. We recommend mounting a protective housing. I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500 Page 4 sur 22... -
Page 8: Workpiece Carrier
Belt guide must be replaced as soon as wear marks or friction on the belt start to appear. Belt Belt guide I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500 Page 5 sur 22... -
Page 9: Transfer Parts
Use the grease reference 800 00 009. 4.6 Damped pneumatic Stoppers Every 5000 hours: Clean the stopper depending on the working environment. I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500 Page 6 sur 22... -
Page 10: Positioning Units With Simple And Double Effect Damped Pneumatic Stoppers
Every 1000 hours: Remove the positioning unit plate after unscrewing the fastening screw. Check the lubrication of the guiding shafts Guiding shafts I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500 Page 7 sur 22... - Page 11 Bush (ref. 110 03 005) Note: On the lift positioning unit, the cylinder can be lubricated without any prior disassembly. I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500 Page 8 sur 22...
-
Page 12: Positioning Units With Damped Pneumatic Stoppers
Every 1000 hours: Remove the positioning unit plate after unscrewing the fastening screw. Check the lubrication of the guiding shafts: Guiding shafts I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500 Page 9 sur 22... - Page 13 Bush (ref. 110 03 005) Note: On the lift positioning unit, the cylinder can be lubricated without any prior disassembly. I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500 Page 10 sur 22...
-
Page 14: Positioning Units For Station With Damped Pneumatic Stoppers
(insert the pin in the bush and then place them on the positioning unit plate). 4.10 Lift positioning units with damped pneumatic stoppers I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500 Page 11 sur 22... -
Page 15: Other Transfer Parts
The others parts of the transfer system do not need any maintenance. A visual check, looking for wear or breaking parts is recommended from time to time. I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500 Page 12 sur 22... -
Page 16: Motor Replacement
Unscrew the four screws from the plastic cover. Screws to be removed Take the circlip and the washer off. Washer Circlip I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500 Page 13 sur 22... - Page 17 Remove the motor from the shaft. Unscrew the anti-rotation screw of the reducer, on the transfer side. Anti-rotation screw I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500 Page 14 sur 22...
-
Page 18: Reassembly Of The Motor
Unscrew the caps on each side of the transfer system and slide the new belt in place of the worn one. (Respect the passage way between the pulleys and belt guide). Covers to be removed I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500 Page 15 sur 22... -
Page 19: Responsability
Only original components can be used for maintenance or fixing. elcom cannot be held responsible for any malfunction if some spare parts have been used without the validation of elcom. elcom reserves the right to make improvements and technical modifications without any further notice. -
Page 20: Appendix
Belt - Belt guide – Workpiece carrier 1000 hours Positioning units (shaft and cylinder) lubricate 3200 hours Conical torque lubricate 5000 hours To clean Stoppers I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500 Page 17 sur 22... -
Page 21: Quality And Environmental Commitment: Iso Certifications
Roulement dia 35 11005205 Arbre moteur 11007001 Plaque 11007003 Embout 11007005 Guide 11007006 Sélecteur D 11007007 Selecteur G 11007008 Rail 11007009 RAIL I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500 Page 18 sur 22... - Page 22 Poulie de renvoi dentée 11050020 Guide bande 1000 cranté 11050201 Bande antistatique 11051002 Flasque renvoi cranté 11051003 Flasque renvoi cranté sym I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500 Page 19 sur 22...
- Page 23 Plaque 15002011 Support G 15002012 Support D 15002052 Bloc gauche 15002053 Bloc droit 15002054 Verrou 15002055 Butoir 15002056 15002057 Came I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500 Page 20 sur 22...
- Page 24 Support pied 15017001 Came courte SG 150 15017002 Rampe SG 15017003 RAIL 15017004 Support came 15021001 Came double 150 15021002 Plaque I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500 Page 21 sur 22...
- Page 25 Embase U 150 x 150 avec tampon 15062002 Plateau 150x150 15062002G Plateau 150x150G 15064001 Embase 150x150 multi. 15064002 Plaque 150x150 15064002G Plaque 150x150G I02-115 User manual & maintenance guide Version 03 (translation of the original manual) of TLM 1500 Page 22 sur 22...
Need help?
Do you have a question about the TLM 1500 and is the answer not in the manual?
Questions and answers