Settings - Electrolux EWF1141AEWA User Manual

16 www.electrolux.com

3.5 Settings

Save Favourite (
Program settings that are frequently used
can be saved (e.g. Cotton, 60°C, 1200
rpm, with Prewash and Vapour).
To program/re-program Favourite with
your own selections and save them,
proceed as follows:
1. Put machine in Stand-By mode.
2. Select your desired wash settings.
3. To save favourite program, press and
hold "Vapour
2 seconds and you will hear "Bip, Bip"
sound and "Favourite" LED is flashing.
To recall the favourite wash program,
turn selector knob to "Favourite
program. You will get acknowledgement
on the screen when the Favourite
program is loaded.
App Program cycle cannot be
saved as a Favourite on the
appliance.
Child Safety Lock (
Your appliance is provided with CHILD
SAFETY LOCK which permits you to
leave the appliance unsupervised with
the door closed without having to worry
that children might be injured by or cause
damage to the appliance.
Set this option after pressing the
Start/Pause touchpad.
To set "Child Lock" option:
●
To activate the function, press and
hold "Prewash" touchpad about
2 seconds until the display shows the
icon "
) Program
" touchpad about
".
If you press any touchpad while
Child Lock is activated, the icon
" " will flash on display 3 times
along with buzzer sound.
The touchpads are locked
(except for the On/Off button).
●
Enabling/Disabling End-Of-Wash
Buzzer
This setting permits you to either enable
or disable the buzzer at the end of the
program. As an example, you might wish
to disable this buzzer when you start a
wash when going to bed, so that when the
wash finished approximately 1 hour later,
it will not disturb you through the night.
"
●
●
) Option
To deactivate the function, press and
hold "Prewash" touchpad about
2 seconds until the icon "
This function remains enabled
even after the appliance is
switched off.
Error warning beeps such as critical
faults are not disabled.
To disable the buzzer sound, press
"SensorWash ( ) and Vapour (
touchpads at the same time about
3 seconds, the icon "
on display along with buzzer sound.
To return to default configuration press
these 2 touchpads at the same time
about 3 seconds, the icon "
show on display along with buzzer
sound.
" goes off.
)"
" will show
" will