Wall Mounting - AOC 16T2 User Manual

Wall Mounting

Preparing to Install An Optional Wall Mounting Arm.
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this
procedure. Follow these steps:
1 Attach the VESA_bracket lock to the back of monitor with 4 screws.
2 Follow the manufacturer's instructions to assemble the wall mounting arm.
3 Place the wall mounting arm onto the VESA_bracket. Line up the holes of the arm with the holes in the
VESA_bracket.
4 Insert the 4 screws into the holes and tighten.
5 Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for
instructions on attaching it to the wall.
NOTE: VESA mounting screw holes are not available for all models, please check with the dealer or official
department of AOC.
9