SCANVIEW ScanMate 5000 Manual page 2

ii
Service Manual • ScanMate 4000/5000 Edition 1 • January 1996
© January, 1996. ScanView. All rights reserved.
No part of this publication may be copied or in any other way reproduced, nor
may it be stored in a retrieval system, without the prior written permission of
ScanView A/S.
The information in this manual is subject to change without notice. ScanView
A/S assumes no responsibility or liability for any errors or inaccuracies that may
appear in this book.
ScanMate 4000 and ScanMate 5000 are trademarks of ScanView A/S.
Other manufacturers' trademarks are used in an editorial fashion, with no inten-
tion of infringement.
Head office
ScanView A/S
Meterbuen 6
DK-2740 Skovlunde
Denmark
Tel: (+45) 44 53 61 00
Fax: (+45) 44 53 61 08
These products have been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
products are operated in a commercial environment.
These products are supplied with a shielded cable. They must be operated
with a shielded cable in order to meet FCC Class A emission limits.
These products generate and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference, to radio communications. Operation of these products in a
residential area is likely to cause harmful interference, in which case the user will
be required to correct the interference at his or her own expense.
Manual edition: 1
Software versions:
Macintosh Plug-in:
Mac MultiMate:
PC Plug-ins:
PC multiMate:
U.S. Subsidiary
ScanView, Inc.
330 Hatch Drive, Suite A
Foster City, CA 94404
U.S.A.
Tel: (+1) 415-378-6360
Fax: (+1) 415-378-6368
PN 732-25-011-01
V 2.1.10
V 3.2.3
V 2.1.11
V 3.0.6