Changing A Wheel: Loosening The Wheel Bolts; Loosening The Wheel Bolts; Loosening The Anti-Theft Wheel Bolt; Screwing In The Anti-Theft Wheel Bolt (Wheel Cover) - Volkswagen T-Roc Manual

Fig. 203 Changing a wheel: loosening the wheel bolts.
Fig. 204 Changing a wheel: tyre valve ① and locations of the anti-theft wheel bolt ② or ③.
First read and observe the introductoryinformation and safety warnings⇒
Use a suitable box spanner to loosen the wheel bolts.
Slacken the wheel bolts only by approximately one turn before raising the vehicle with the vehicle
jack.
If a wheel bolt is very tight, you may be able to loosen it by pushing down the end of the spanner
carefully with your foot. Hold on to the car for support and take care not to slip.

Loosening the wheel bolts

Loosening the anti-theft wheel bolt

Screwing in the anti-theft wheel bolt (wheel cover)

it will go ⇒ Fig. 203 .
-theft wheel bolt out of the vehicle toolkit.
anti-theft wheel bolt as far as it will go.
Introduction
-clockwise ⇒
.
-clockwise ⇒
.