A3200 iPC Hardware Manual
1.2. Remote Server Operation
If you ordered the -SW01 software package with the -Remote option and it was installed and configured
at the factory, the software installed on the A3200 iPC will be configured for remote server operation. In
this configuration, only one of the available Ethernet ports will be configured for use with the remote
server. Refer to the figures below to determine which port you should use for each A3200 iPC hardware
configuration.
www.aerotech.com
Figure 1-1:
-CC02/-CC03 Connector View (typical)
Figure 1-2:
-DT01 Connector View (typical)
1.2. Remote Server Operation
13