Remote Server Operation; Figure 1-1: -Cc04/-Cc05 Connector View (Typical); Figure 1-2: -Dt01 Connector View (Typical) - Aerotech Automation1 iPC Series Hardware Manual

1.2. Remote Server Operation

1.2. Remote Server Operation
Only one of the available Ethernet ports will be configured for use with the remote server. Refer to the
figures below to determine which port you should use for each Automation1 iPC hardware
configuration.
12
Figure 1-1: -CC04/-CC05 Connector View (typical)
Figure 1-2: -DT01 Connector View (typical)
Automation1 iPC Hardware Manual
www.aerotech.com