Advertisement
HAW-2 Start-Up Genie
STEP 3: Verification
1. An email will be sent to the Email Address 1 entered on the Notifi cation Setup page. Click
this link to accept the terms and conditions. If an email is not received, repeat the setup
steps 1 and 2 to verify the correct email address was entered.
2. If your device is connected to the same network as the alarm, you will be directed to the
Notification Setup page. If all settings are correct, the setup page can be closed.
Note: There is no need to Restart the Alarm if changes were not made.
STEP 4: Setup Testing
1. Press the "TEST" button on the front of the HAW-2 WiFi alarm. The alarm will sound
and the alarm ring lights will activate while the "TEST" button is being held.
2. Verify that an alarm notification is received via email and/or text.
Note: It may take several minutes for the message to appear in your email inbox or
message folder, depending upon email server traffi c or other circumstances. If you have
not received a notification within 5 minutes, verify the email address and/or cellular phone
information is entered correctly and that any email fi lters are set to allow messages from
mywifi alarm@mywifi alarm.com.
While using a WiFi connection, a signal strength rating will also be sent with each alarm
and power restored notifications.
5.0 - 10.0 Great!
3.0 - 4.9 Good. No signal loss is expected.
2.0 - 2.9 Marginal. You may experience occasional signal loss.
0.0 - 1.9 Weak. Move alarm closer to wireless router.
CentriPro
PAGE 5
Advertisement
