Follow the steps to make any changes to notification data after the initial setup has been performed. STEP 1: WIFI NETWORK SETUP 1. Press the Setup button on the HAW-2 WiFi alarm (the blue network status light will flash continuously).
At least one email address or one phone number must be provided to receive notification messages. IP Address: 192.168.1.1 1. On the HAW-2 WiFi alarmsetup page, fill in the appropriate data: MAC Address: A1:B5:C3:D2:E7:C2 a. Press the arrow on the Network Name box...
Note: There is no need to Restart the Alarm if changes were not made. STEP 4: Setup Testing 1. Press the “TEST” button on the front of the HAW-2 WiFi alarm. The alarm will sound and the alarm ring lights will activate while the “TEST” button is being held.
• Notification email has been blocked. Unblock or allow emails from mywifi alarm@mywifi alarm.com in your email account. • The HAW-2 WiFi alarm terms and conditions have not been accepted and/or a verification email has not been sent. Follow steps in the “Alarm Notification Setup” section.