Advertisement
HAW-2 Start-Up Genie
BEFORE YOU BEGIN
Mount and wire your alarm according to installation instructions.
NOTE:
• Cellular WiFi hotspots are not recommended for use with this WiFi alarm, as intermittent or unreliable
notification service can result.
• WPA2 Security must be enabled on the wireless router for WiFi connections.
This quick start manual covers setup using a WiFi enabled device. For setup using other network connection
options, please see the full setup manual at www.goulds.com
Follow the steps to make any changes to notification data after the initial setup has been performed.
STEP 1: WIFI NETWORK SETUP
1. Press the Setup button on the HAW-2 WiFi
alarm (the blue network status light will flash
continuously).
2. Using a WiFi enabled device, ensure WiFi is turned
on. Go to the device's WiFi settings and select the
WiFi network named
"Alarm XX-XX-XX-XX-XX-XX"(XX... = alarm unit id).
3. If the setup page does not automatically open,
open a web browser and enter
setup.mywifi alarm.com in the address bar.
CentriPro
PAGE 3
Advertisement
