Britax ENDEAVOURS User Manual page 29

5� Push the infant car
seat firmly into the
vehicle seat while
removing all slack from
the vehicle belt�
Carrier Only Installation with Lap Belt
ü Check that the vehicle belt is tight and that the
infant car seat is secure� The infant car seat is
secure when it moves less than 1 inch (2�5 cm)
front-to-back or side-to-side at the vehicle belt path�
ü Check that the recline angle is correct� The proper
recline angle is achieved when the level line on the
carrier is level to the ground�
ü Check that the vehicle belt is not twisted and that it
is tight and locked�
ü Check that the infant car seat handle is rotated into
any locked position�
ENDEAVOURS/B-SAFE ULTRA User Guide
CHECKLIST
27