Table of Contents
Advertisement
Downloaded from
Elcodis.com
electronic components distributor
ELECTROMAGNETIC
COMPATIBILITY
The European Council Directive 89/336/EEC requires that
electronic equipment does not generate electromagnetic
disturbances that exceed defined levels and has an adequate
level of immunity to enable it to be operated as intended.
The specific standards applicable to this product are detailed
in the appendices.
Since there are many electrical products in use that pre-date
this Directive and may emit electromagnetic radiation in
excess of the standards defined in the Directive there may be
occasions where it would be appropriate to check the
analyser prior to use. The following procedure should be
adopted:
• Go through the normal start up sequence in the location
where the equipment is to be used.
• Switch on all localised electrical equipment that might be
capable of causing interference.
• Check that all performance are as expected. (A level of
disturbance in the performance is acceptable). If not
adjust the position of the instrument to minimise
interference or switch off, if possible, the offending
equipment for the duration of the test.
6
Advertisement
Table of Contents
