Advertisement
Quick Links
Advertisement
Related Manuals for Harrie Leenders DAYNA
Summary of Contents for Harrie Leenders DAYNA
- Page 1 DAYNA HARRIE LEENDERS SINCE 1979 DAYNA INSTALLATION EN...
- Page 2 DAYNA HARRIE LEENDERS Points of attention installation Dayna Transport Take the Dayna on a hand truck from the left side. To level Use the 4 adjustable feet. Remove transport guard Only remove the transit guard after the Dayna has been connected to the chimney.
- Page 3 (= too tight), the 4x adjustable feet need to be levelled. 2 x 30 degrees rotation (rear connection) Bovenaanzicht voet Dayna 2 x m8 Allen screw + lock nut at position A. 2 x 60 degrees rotation Place 1 x m8 Allen screw + lock nut at position B without allowing it to touch the base of the stove.
- Page 4 General instructions and regulations Installation To secure the warranty, the Dayna must be installed by a properly qualified person employed by a dealer recognized by Harrie Leenders Haardkachels. See leenders.nl for a current list of addresses of recognized dealers or contact the manufacturer.