Related Manuals for GNS 3000
Summary of Contents for GNS 3000
- Page 1 <?> <?> GNS 3000 GPS/ GALILEO/ GLONASS TRICEIVER 99 Channels Logger Function SD Card Support High Sensitivity Up to 10 Hours Operation Time...
- Page 2 QR Code GNS 3000 Support Page...
- Page 3 USER MANUAL GNS 3000 GPS/ GALILEO/ GLONASS TRICEIVER Charge indicator Bluetooth status GPS status on-/off -switch Micro SD card slot USB power supply jack...
-
Page 4: Safety Notices
SBAS System for accuracy improvement, all worldwide standards (WAAS, EGNOS, QZSS, MSAS, GAGAN) are supported. Due to its state of the art GNSS and Bluetooth technology the GNS 3000 supplies Apple's (IOS 3.0.1) (iPad 2), iPhone version 3G... -
Page 5: Package Contents
LED turning off briefly every second while a GPS fix is available. To deactivate the logger function, switch off the device as usual. Using the GNS tool, GNS 3000 Track the logged data can be transferred to your computer and saved in NMEA- or KML-(Google™... - Page 6 GNS 3000 Bluetooth Note: Apple Mac Books can use the GNS 3000 receiver as well. The log data stored in the can be read out and displayed on Mac Books with a software e.g. „MyTracks4Mac“ (see https://www.mytracks4mac.info/index. php/de/). The log data always will be transmitted via a Bluetooth connection, the USB port has only a charging and power supply function.
- Page 7 Charging GNS 3000 is equipped with a Li-Ion battery. The operation time is over 10 hours. Charging: Charging time is approximately 3.5 hours (empty battery). Connect the 3000 with the supplied charging cable to a USB port of your choice. This can be, for example, the USB port of a PC, or any external USB charger like a cigarette lighter charger, for example.
-
Page 8: Power Management
GNS 3000 partnership between the and your Android device. Start the „Bluetooth GPS“ app and select the GNS 3000 receiver. Then choose the „Enable Mock GPS Provider“ option and make the connection by pressing the „Connect“ button. Your Android device will now receive the GPS data from the GNS 3000 via Bluetooth. - Page 9 3000 - simply plug in the external charging cable to perform a full RESET. An existing Bluetooth connection should be terminated first. Technical data General Weight GNS 3000 only Dimensions 79.1mm x 45.3mm x 11.3mm Storage -10…+50°C (14…122°F) Ambient temperatures Operation 0...
- Page 10 EN 301 489-17 V2.1.1; EN 300 440-2 V1.4.1; EN 300 328 V1.7.1 and is listed under Bluetooth. Qualified Products: Although the GNS 3000 conforms to the current strict guidelines and norms it cannot be guaranteed that other devices will not be affected by interference.
-
Page 11: Warranty Notice
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. -
Page 12: Technical Support
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Android is a trademark of Google Inc. V 1.0 EU © 2020 by GNS - Electronics GmbH Reproduction in whole or in part only with the permission of... - Page 13 GNS Electronics GmbH Adenauerstrasse 18 D-52146 Würselen Telefon +49 (0) 24 05 / 41 48 - 0 Telefax +49 (0) 24 05 / 41 48 -19 www.gns-electronics.com info@gns-electronics.com FCC ID: XXXXXXXXXXXX...