Miele PG 8581 Operating Instructions Manual page 80

Additional settings
Resetting the
counter
Setting the interval
80
The counter for the cleaning interval may be reset only after clean-
ing has been completed.
Filter combination
Reset
Interval
Reset
-
The counter is reset.
Interval
-
Select an option using the  and  arrow buttons and confirm your

choice with OK.
The interval depends on the number of programs sequences and
must be set on the basis of usage and the expected number of parti-
cles/solids in the soiling.
Example of tubular filter:
For weekly cleaning with 2 program sequences per day and 5 work-
days in the week, this yields an interval of 10 (2 x 5 = 10). With a
higher incidence of particles, a shorter interval should be selected in
order to clean the tubular filter several times weekly. With a lower inci-
dence of particles, weekly cleaning is sufficient.
We recommend cleaning the tubular filter after every 10 program se-
quences.
The setting value is entered in increments of 5. The possible range is
shown in the bottom line of the display.
Use the arrow buttons  (higher) and  (lower) to set the Interval.

Press OK to save the setting.

Tubular filter
Reset
Interval
Interval
10
(5 - 100)