Moving A Program: Allocating Program Selection Buttons - Miele PG 8581 Operating Instructions Manual

Additional settings
78
Moving a program: allocating program selection but-
tons
You can sort the program selection list to suit your requirements and
therefore also allocate the program selection buttons ,  and
.
Open the menu as follows:

 button
 Additional settings
 Move program
Move program
All enabled programs are shown in the program list (see "Additional
settings/Enabling programs"). A program's position in the program list
is the determining factor for assigning the program selection buttons.
Programs are numbered from 1 - n. The first three programs in the list
are assigned to the program selection buttons; for example:
- 1. Vario TD Dental
2. Rinse on program selection button 
-
3. Drain on program selection button 
-
4. Vario TD Intensive
-
- etc.
Use the  and  arrow buttons to select the program you would

like to move.
Confirm your selection with OK.

Now you can move this program within the list.
Use the  and  arrow buttons to move the program to the posi-

tion you want.
Press OK to save the program to the selected position.

The program which was previously saved to this position and all sub-
sequent programs are moved down by one position.
The process can be repeated as often as you wish.
Press the  button to exit the menu.

1. Vario TD Dental
2. Rinse
on program selection button 