Charging The Speaker - JVC SP-AD70-A Instruction Manual

Charging the Speaker

The unit has a built-in rechargeable battery, which should be charged before using the speaker for the first time.
The battery is charged automatically whenever the unit is connected to a computer or a USB charging device.
USB to Micro USB
Cable (included)
1. Open the jack cover of the speaker.
2. Connect the supplied micro-USB cable to the speaker, and then connect the other end to a computer.
3. The battery indicator will flash red during charging. The light will go off after fully charge.
Computer
USB charging
device
• Micro-USB socket is for charging the unit only.
• Do not overcharge the battery as it may shorten its life.
Disconnect the USB cable after the unit is fully charged.
• The unit should be fully recharged after using the device each
time. This will keep the health of the battery.
• If you plan to store your device for longer than 6 months,
charge the battery for an hour every 6 months to keep it fresh.
13