Table of Contents
Advertisement
4. IF ONLY USB DRIVE OR SD/MMC CARD IS INSERTED, STEP 3 CAN BE SKIPPED.
5.THE USB OR SD ICON WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.
5.TO FINISH ENCODING, PRESS
PHONO MODE.
REMARK:-
-
THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE PHONO
-
THE RECORDING FORMAT IS PRESET AT – MP3
AUX IN JACK & ENCODING
PRESS AUX BUTTON TO ACTIVATE "AUX" ON DISPLAY, THEN CONNECT THE EXTERNAL AUDIO DEVICE
(SUCH AS CD PLAYER) THROUGH THE AUX IN JACK. AUDIO SIGNAL FROM THE EXTERNAL AUDIO DEVICE
CAN BE PLAYED THROUGH THE SYSTEM.
AUX IN ENCODING
1. PRESS AUX BUTTON TO SELECT "AUX" ON DISPLAY, THEN INSERT MEMORY DEVICE (USB DRIVE, SD OR
MMC CARD)
2.PRESS THE REC BUTTON, IT WILL TAKE 3-5 SECONDSS TO READ MEMORY DEVICE. THEN USB OR SD
ICON WILL BE FLASHING.
3. PRESSING SKIP UP OR SKIP DOWN BUTTON
ENCODING. THEN PRESS THE REC BUTTON AGAIN TO CONFIRM.
THE ENCODING MODE AFTER FEW SECONDSS.
4.IF ONLY USB DRIVE OR SD/MMC CARD IS INSERTED, STEP 3 CAN BE SKIPPED.
5.THE USB OR SD ICON WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.
6.TO FINISH ENCODING, PRESS
MODE.
REMARK:-
-
THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE EXTERNAL
AUDIO DEVICE.
-
THE RECORDING FORMAT IS PRESET AT – MP3
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY CARD
CONNECTING
THE SYSTEM IS ABLE TO DECODE AND PLAYBACK ALL MP3 / WMA FILE WHICH STORED IN THE MEMORY
MEDIA WITH USB CONNECTING PORT OR SD/MMC MEMORY CARD.
6.
PLUG-IN THE USB PLUG WITH THE FACE UP & MAKE SURE IT GOING INTO COMPLETELY OR INSERT
THE MEMORY CARD IN THE DIRECTION OF THE ARROW AS SHOWN IN THE LABEL ON THE UNDERSIDE
OF THE MEMORY CARD SLOT COVER. INSERT STRAIGHT WITHOUT BENDING.
7.
CONNECTING THE USB UPSIDE DOWN OR BACKWARDS COULD DAMAGE THE AUDIO SYSTEM OR THE
STORAGE MEDIA (USB THUMB DRIVE / SD/MMC CARD). CHECK TO BE SURE THE DIRECTION IS
CORRECT BEFORE CONNECTION.
8.
PRESS CD/USB/SD BUTTON REPEATEDLY TO SELECT "USB" OR "CARD" ON DISPLAY, THEN INSERT
MEMORY DEVICE (USB DRIVE, SD OR MMC CARD).
9.
THE SYSTEM WILL START READING THE STORAGE MEDIA AUTOMATICALLY AFTER FUNCTION
SELECTION, AND DISPLAY WILL SHOW THE TOTAL NUMBER OF MP3/WMA FILES (EG. 016).
10.
THEN THE SYSTEM WILL START AUDIO PLAYBACK FROM DESRIED DEVICE (USB OR SD/MMC)
AUTOMATICALLY.
PLAY / PAUSE BUTTON
PRESS THE "PLAY/PAUSE"
-
CONTINUE.
STOP
BUTTON
BIT RATE : 128 KBPS
TO SELECT DESIRED MODE (USB OR SD) FOR
STOP
BUTTON
AND DISPLAY WILL SHOW "END" AND RETURN TO "AUX"
BIT RATE : 128 KBPS
BUTTON ONCE TO HALT PLAYING, PRESS IT AGAIN TO
AND DISPLAY WILL SHOW "END" AND RETURN TO
AND THE SYSTEM IS STARTING
18 -
W
Advertisement
Table of Contents
