Advertisement
Learning channel 3 into roller shutter 1
1
Ι
3
Ι
1
Ι
Aesult: Roller shutter 1 now can also be operated with
channel 3.
Learning channel 3 into roller shutter 2
2
Ι
3
Ι
2
Ι
Aesult: Roller shutter 2 now can also be operated with
channel 3.
866084_g•en•2017-12-01
Place receiver 1 into
learn mode: Select chan-
nel 1, press and hold the
learn button, roller shut-
ter 1 waves once, release
the button.
Learn channel 3 as an
auxiliary channel: Select
channel 3. Press and hold
the learn button, roller
shutter 1 waves once,
release the button. Chan-
nel 3 is now an auxiliary
channel for roller shutter 1.
End the learn mode: Se-
lect channel 1 and press
the "Up" or "Down" button.
Place receiver 2 into
learn mode: Select chan-
nel 2, press and hold the
learn button, roller shut-
ter 2 waves once, release
the button.
Learn channel 3 as an
auxiliary channel: Select
channel 3, press and hold
the learn button, roller
shutter 2 waves once,
release the button. Chan-
nel 3 is now an auxiliary
channel for roller shutter 2.
End the learn mode: Se-
lect channel 2 and press
the "Up" or "Down" button.
Deleting an auxiliary channel
You can delete all auxiliary channels learned into the
receiver if you have committed an error and you want to
start over again. Note the following example:
1
2
1
2
Ι
Ι
= Master channel
Fig. 3
Auxiliary channels in receiver 1 and 2 shall be deleted.
Carry out the following operation steps consecutively
n
with the respective master channel:
1
Ι
1
Ι
2
Ι
2
Ι
Aesult: All auxiliary channels in receiver 1 and receiver 2
were deleted.
Only one master channel and 15 auxiliary
R
ITICE
channels can be learned into each receiver.
The master channel cannot be deleted but can
only be overwritten with a new channel. The
auxiliary channels are not deleted when you
learn in a new master channel. The weather sta-
tion can be learned in as an auxiliary channel.
We reserve the right to carry out improvements
1
2
3
Ι
= Auxiliary channel
Delete all auxiliary chan-
nels in receiver 1: Select
master channel 1, push
the learn button and hold
it for at least 20 seconds
until the roller shutter no
longer carries out any
movement!
End the procedure: Se-
lect channel 1 and press
the "Up" or "Down" button.
Delete all auxiliary chan-
nels in receiver 2: Select
channel 2, push the learn
button and hold it for at
least 20 seconds until the
roller shutter no longer car-
ries out any movement!
End the procedure: Se-
lect master channel 2 and
push the "Up" or "Down"
button.
3
Advertisement
