Programming The Oven; Safety And Energy Saving Functions - Zanussi ZBS 772 Instruction Booklet

Zanussi owners manual electric oven zbs 772
Table of Contents

Advertisement

Programming the Oven

How to set the minute minder
1) Press button
Function. The relevant pilot light will flash
and the control panel will display 0.00.
2) Press button
to select the required time (up to 19 hours
59 minutes). The Minute Minder will wait 3
seconds and then start running.
3) The display will count down the
programmed time in minutes.
4) When the programmed time has elapsed,
an acoustic alarm will be heard, and 0.00
will flash on the control panel. The oven will
NOT switch off if in use.
5) To switch off the acoustic alarm, press any
button. The control panel will display the
time of day and the Minute Minder pilot light
will go out.
To cancel the Minute Minder:
press button
pressed, press button
will show 0.00.
To programme the Oven to switch off
1) Place food in the oven, select a cooking
function and adjust the cooking temperatu-
re if required.
2) Press button
Duration function. The Cooking Duration
pilot light will flash and the control panel will
display 0.00.
3) Press button
required time (up to 19 hours 59 minutes).
The programmer will wait 3 seconds and
then start running.
4) The display will count down the
programmed time in minutes.
5) When cooking time is over, the oven will be
switched off automatically and an acoustic
alarm will be heard, while 0.00 will flash on
the control panel.
6) To switch off the acoustic alarm, press any
button. The control panel will display the
time of day and the Cooking Duration pilot
light will go out.
To cancel the Duration Time:
press button
pressed, press button
If this operation is carried out while a
program is running on, the oven will
NOT switch off.
to select the Minute Minder
or
within 3 seconds
and, while keeping it
too. The display
to select the Cooking
or
to select the
and, while keeping it
too.
When a Cooking Duration time is set, the oven
i
will switch off a few minutes before the end of
the programmed time, and use the residual
heat. See "Safety and Energy Saving
Functions".
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents