Opening the Housing
1. Lid Snaps have a Lock.
To open, push Lid Snap Lock
forward and lift as shown. Keep
pressure on the Lid Snap so it does
not fly open quickly. Some lid
snaps have a lot
o f spring tension once they go over center, have a firm grip on the
lid snap. Lid Snaps may be opened one at a time.
Installing the Camera
1. Remove the back from the housing. The mounting tray for the
camera is secured to
the housing back.
Position the camera
on the tray and
secure it with the
mounting bolt which
threads into the
camera's tripod
socket. Use
a coin or fiat bladed
screwdriver to
tighten the mounting
bolt so the camera is
flat against the tray.
CAUTION:
Some camera tripod socket threads are plastic. The mounting tray
bolt is metal. Do not cross thread or over tighten as you may
damage the camera tripod socket threads.
Push Forward
4
Lid Snap Lock