Related Manuals for Target Fairmont
Summary of Contents for Target Fairmont
- Page 1 Fairmont 8’ x 8’ FT Steel Gazebo with Curtains style # GFS20200B dpci # 009050059 >>assembly instructions...
-
Page 2: Important Warning
Congratulations on your latest Target purchase. Now what? Don't start sweating over this box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you'll be on your way to transforming your patio in no time. -
Page 3: Warranty
This Gazebo comes with a one year limited warranty against original manufacture defects. If you experience trouble with your Gazebo, please call the customer service number below. Target Corporation Toll Free at: 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday. - Page 4 table of contents introduction hardware parts list assembly 7-16 QUESTIONS? Please call 855-MYTGTHOME (855-698-4846) parts and service. For faster service, have th e style number and DPCI number r eady when calling.
- Page 5 hardware (Part O)×28 (Part P)×16 (Part Q)×4 (Part R)×12 M6*55mm bolt with washer M6*15mm bolt with washer M6*30mm bolt with washer (Part S)×16 (Part T)×2 (Part U)×1 (Part V)×4 ground spike allen wrench wrench plastic washer...
-
Page 6: Description Quantity
ITEM DESCRIPTION QUANTITY post leg beam corner inclined tube middle inclined tube shade rod top connector U-shaped part 1 U-shaped part 2 post base tube connector connection buckle top canopy canopy curtain... - Page 7 step 01: (Part O)×12 (Part T)×1 M6*15mm bolt with washer allen wrench ATTENTION: To avoid damage to your new gazebo, please use either the carton or another soft surface such as carpet as a working surface to prevent product damage during assembly. 1.
- Page 8 step 02: (Part T)×1 (Part O)×16 allen wrench M6*15mm bolt with washer 1. Attach the beam (B) to the post leg (A), secure with M6*15mm bolt with washer (O) using allen wrench (T). 2. Repeat above step until the 4 beam (B) are secured to the post leg (A). Do not completely tighten screws until all screws are in place.
- Page 9 step 03: 1. Attach the tube connector (J) to the shade rod (E). 2. Repeat above step until the 8 tube connectors (J) are attached to the shade rod (E). Do not completely tighten screws until all screws are in place.
- Page 10 step 04: (Part Q)×4 (Part P)×8 M6*30mm bolt with washer M6*55mm bolt with washer (Part R)×4 (Part T)×1 (Part U)×1 allen wrench wrench (Part V)×4 plastic washer 1. Attach the tube connector (J) to the beam (B), secure with M6*30mm bolt with washer (P) using the allen wrench (T). 2.
- Page 11 step 05: 1. Attach the corner inclined tube (C) and middle inclined tube (D) to the top connector (F). Do not completely tighten screws until all screws are in place.
- Page 12 step 06: (Part P)×8 (Part R)×8 M6*30mm bolt with washer (Part U)×1 (Part T)×1 wrench allen wrench 1. Attach the corner inclined tube (C) to U-shaped part 1 (G), secure with M6*30mm bolt with washer (P) and nut (R) using allen wrench (T) and wrench (U). 2.
- Page 13 step 07: 1. Attach the canopy (M) and top canopy (L) on the top. Do not completely tighten screws until all screws are in place.
- Page 14 step 08: 1. Slip the corner inclined tube (C) and middle inclined tube (D) into the top canopy (L) and canopy (M). Do not completely tighten screws until all screws are in place.
- Page 15 step 9: (Part S)×16 ground spike 1. Hanging the curtain (N) to the beam (B) by using the connection buckle (K). 2. Insert the ground spikes (S) through the post base (I) and into ground. Do not completely tighten screws until all screws are in place.
- Page 16 step 10: 1. Tighten all bolts. Ensure all connections are secure before use. You are now ready to enjoy your new gazebo.
- Page 18 2020 Target. The Bullseye Design is a trademark of Target Brands Inc. All rights reserved.