Related Manuals for Target Threshold 009050409
Summary of Contents for Target Threshold 009050409
- Page 1 10’ X 10’ Adjustable Shade Pergola Black/Gray style # GFS00753C-B dpci # 009050409 >>assembly instructions...
- Page 2 Congratulations on your latest Target purchase. Now what? Don't start sweating over this box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you'll be on your way to transforming your patio in no time.
- Page 3 This Pergola comes with a one year limited warranty against original manufacture defects. If you experience trouble with your pergola, please call the customer service number below. Target Corporation Toll Free at: 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday.
- Page 4 table of contents introduction hardware parts list assembly 7-19 Please call 855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have th e style number and DPCI number r eady when calling. QUESTIONS?
- Page 5 hardware (Part O)×12 (Part R)×2 (Part N)×92 (Part P)×16 (Part Q)×16 allen wrench ground spike M6*35 mm screw M6*55 mm screw M6*15 mm screw...
- Page 6 ITEM DESCRIPTION QUANTITY post leg1 post leg connector bar1 connector bar2 top bar rail bar shade rod sling cover corner bracket1 corner bracket2 end tip post decoration post base post base plate tube connector duo tube connector...
- Page 7 step 01: & & (Part N)×8 (Part R)×1 allen wrench M6*15mm screw ATTENTION: To avoid damage to your new pergola, please use either the carton or another soft surface such as carpet as a working surface to prevent product damage during assembly. 1.
- Page 8 step 02: (Part R)×1 (Part N)×8 allen wrench M6*15mm screw 1. Place the post leg1 & 2 (A1 & A2) on the soft surface. 2. Attach the connector bar1 (B1) to the post leg1 & 2 (A1 & A2), secure with M6*15 mm screws (N) using the allen wrench (R). 3.
- Page 9 step 03: (Part N)×8 (Part R)×1 M6*15mm screw allen wrench 1. When the post leg1 & 2 (A1&A2) connections are made, set the post leg1 & 2 (A1 & A2) up right. 2. Attach the connector bar2 (B2) to the post leg1 & 2 (A1 & A2), secure with M6*15 mm screws (N) using the allen wrench (R).
- Page 10 step 04: & & (Part N)×16 (Part R)×1 allen wrench M6*15mm screw & 1. Attach the end tips (H) to the post leg1 & 2 (A1 & A2), secure with the M6*15 mm screws (N) using the allen wrench (R). Do not completely tighten screws until all screws are in place.
- Page 11 step 05: & & & (Part N)×8 (Part R)×1 & allen wrench M6*15mm screw & & 1. Push up the post decorations (I) and align the screw holes on the post leg1 & 2 (A1 & A2), secure with M6*15 mm screws (N) using the allen wrench (R). Do not completely tighten screws until all screws are in place.
- Page 12 step 06: (Part N)×32 (Part R)×1 allen wrench M6*15mm screw 1. Attach the corner bracket1 & 2 (G1 & G2) to the post leg1 & 2 (A1 & A2) and the connector bar1 & 2 (B1&B2), secure with M6*15mm screws (N) using the allen wrench (R) .
- Page 13 step 07: (Part O)×8 (Part R)×1 allen wrench M6*35mm screw 1. Attach 4 of the top bars (C) to both connector bar2 (B2), secure with M6*35 mm screws (O) using the allen wrench (R). Do not completely tighten screws until all screws are in place.
- Page 14 step 08: (Part R)×1 (Part N)×4 (Part O)×4 M6*15mm screw M6*35mm screw allen wrench 1. Attahch another 2 top bars (C) to the end tips (H), secure with M6*15mm screws (N) and M6*35mm screws (O) using the allen wrench (R). Make sure all top bars (C) are parallel.
- Page 15 step 09: 1. Insert the rail bars (D) through the hole of the tube connectors (L). 2. Insert the duo tube connectors (M) onto both ends of the rail bars (D). Do not completely tighten screws until all screws are in place.
- Page 16 step 10: & (Part P)×16 (Part R)×1 allen wrench M6*55mm screw 1. Attach the rail bars (D) and the suo tube connectors (M) to the post leg 1 & 2 (A1 & A2), secure with M6*55mm screws (P) using the allen wrench (R). &...
- Page 17 step 11: 1. Insert the sling cover (F) through the space between the top bar (C) and the connector bar1 (B1), ensure the sewing seams on the sling cover (F) face inside the pegola. 2. Pull the sling cover (F) on to the top bar (C). 3.
- Page 18 step 12: (Part N)×8 (Part Q)×16 (Part R)×2 ground spikes allen wrench M6*15 screw & 1. Insert the shade rod (E) into the poket on the 2 side of sling cover (F), the scrw holes should faced to the inside of pergola. 2.
- Page 19 step 13: 1. Tighten all screws. Ensure all connections are secure before use. You are now ready to enjoy your new pergola.
- Page 21 2017 Target. The Bullseye Design is a trademark of Target Brands Inc. All rights reserved.