Before Installation - LG OTW420B Install Manual

Follow the instructions in this manual to product
properly.
If you do not follow these instructions, the product may be
installed incorrectly and cause serious injury or the product
may become damaged.
When installing the product, first check that the wall is
strong enough. Use the anchors and screws provided.
If you use anchors and screws that are not specified by the
manufacturer, they may not hold the weight of the product,
causing safety issues.
Do not clean the product with a wet towel, and do not
place a heater, or humidifier beneath it.
Moisture, steam or heat permeating into this product may
result in fire, electric shock or product damage.
Make sure that the power cord is removed from the
outlet before installing the product.
Otherwise, it may cause an electric shock or fire.
Be sure to use the accessory cable provided. Otherwise,
friction between the product and the wall may cause
damage to the connector. (Depending on model)

BEFORE INSTALLATION

* Do not use the product for purposes other than mounting a display on the wall.
* When installing/using the wall mount, be cautious of product damage and avoid accidents.
* Install the wall mount according to the installation manual.
* If you have not fully read and understood the installation manual, do not install the product and contact the dealer to have a
specialized installer install the product for you.
* Even if you are not a specialized installer, it is advantageous to have experience in mechanical or construction field in completely
understanding this manual and installing the product.
* Mount the product only on a concrete wall. LG Electronics Inc. is not liable for any accidents caused by mounting the product on
walls made of any other materials, including wood, plywood, and bricks.
* Install the product only on a vertical wall.
The manufacturer is not responsible for issue from installing the product on an angled wall or on the ceiling.
* Check that the accessories provided with the product are all included before installing. LG Electronics is not liable for any damage or
loss of accessories after the package has been opened.
* Keep the included accessories out of reach of babies or children as it can cause safety issues including suffocation from swallowing
the parts.
* Make sure screws are tight against the wall, but do not overtighten.
Applying excessive force to screws may damage to the wall, affect the product performance, or cause the product to become
damaged.
* Be careful not to install a TV that exceeds the weight restrictions of the wall mount.
* Be careful with the tools used during installation to prevent accidents or damage.
<Tools you will need>
Phillips head + driver (manual or motorized) / 8 mm socket wrench / Level / Drill / You may also need an Ø 4 mm drill bit for steel or an
Ø 8 mm drill bit for concrete.
Caution
To install or adjust the height of the product, two or
more people are needed.
If you try to install or move the product alone, it may fall
and cause injury or the product may become damaged.
When drilling holes into the wall, make sure you use a
drill and drill bit with the specified diameter. Ensure that
you also follow the instructions regarding the depth of
the holes.
Otherwise, the product may be installed incorrectly and
cause safety issues.
Keep this product away from sprinklers, sensors, high-
tension wires and power sources. Do not install it in a
location where vibrations or impacts are likely to occur.
Wear safety gloves when installing the product. Do not
use your bare hands.
Otherwise, it may cause personal injury.
3