Before Installation - LG OTW630B Installation Manual

Wall mounting bracket
Table of Contents

Advertisement

4

BEFORE INSTALLATION

Do not use the product for purposes other than mounting a display on the wall.
When installing/using the wall mount, be cautious of product damage and avoid accidents.
Install the wall mount according to the installation manual.
If you have not fully read and understood the installation manual, do not install the product and contact the dealer to
have a specialized installer install the product for you.
If you are not a professional installer, it would be advantageous to have experience in a mechanical or construction
field, this would be helpful to better understand this manual, and aid in installing the product correctly.
This product is designed to be mounted to walls that use standard intervals between the studs.
Install the screw to attach the wall mount so that it can be assembled at the center from both ends of the studs. Use
of a stud finder, a separate device, is recommended.
Install the product only on a vertical wall. The manufacturer is not responsible for improper operation of product,
when product is installed on an angled wall or on the ceiling.
Check that the accessories provided with the product are all included before installing. LG Electronics is not liable for
any damage or loss of accessories after the package has been opened.
Keep the included accessories out of reach of babies or children, it can cause safety issues including suffocation from
swallowing the parts.
Make sure screws are tight against the wall, but do not overtighten.
Applying excessive force to screws may damage to the wall, affect the product performance, or cause the product to
become damaged.
Be careful not to install a TV that exceeds the weight restrictions of the wall mount.
Be careful with the tools used during installation to prevent accidents or damage.
Tools you will need
Phillips head + driver (manual or motorized) / 8 mm socket wrench / Level / Drill / You may also need an Ø 4 mm drill
bit for steel or an Ø 8 mm drill bit for concrete.

Advertisement

Table of Contents
loading

Table of Contents