Table of Contents
Advertisement
For More Sales And Product Information, Please Visit : BMIGaming.com
Cabinet Assembly
Note: 2 people are required, and ladders are recommended. Marquee assembly is top heavy and can
tip over if not fully secured!
1. Place cabinet in desired floor location. Remove upper back door and carefully place such that it will
not fall over or be damaged. Set up ladders next to the cabinet for marquee installation.
2. Locate the marquee assembly as well as the following hardware:
a. (6) black tamper proof Torx machine screws, ¼ - 20 thread, 1-1/2" long
b. (6) ¼" black split lock washers
c. (6) ¼" black flat washers
3. Using a T-27 bit, securely mount the marquee assembly atop the cabinet as shown in the assembly
setup diagram, avoiding any pinching/crushing of the wire harness which should pass through the access
hole. Connect marquee harness to cabinet harness, accessible through upper door.
TM
slither.io
9 |
P a g e
Advertisement
Table of Contents
Need help?
Do you have a question about the slither.io and is the answer not in the manual?
Questions and answers