Mulco MIYOTA 8205 Instruction Manual

MULCO
"AUTOMATIC SELF-WINDING - 21 JEWELS"
No batteries required with a 40-hour power reserve

A) DISPLAY

Hour hand
Second hand
*Date & Day of the week position may be located at different position depends on models.

B) SETTING THE TIME

1. Pull the crown out to the 2nd position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position,
second hand begins to run.

C) SETTING THE DATE

1. Pull the crown out to the 1st position.
2. Turn the crown counter-clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may
not change on the following day.
3. After the date has been set, push the crown back to the normal position.

D) SETTING THE DATE OF THE WEEK

1. Pull the crown out to the 1st position.
2. Turn the crown clockwise to set the day of the week.
* If the date is set between the hours of around 9:00 PM and 1:00 AM,
the day of the week may not change the following day.
3. After the day of the week has been set, push the crown back to the normal position.
MULCO
MIYOTA 8205
AUTOMATIC MECHANICAL
Minute hand
1
SUN
Normal Crown
Position
*Date
Day oh the
Instruction Manual
MIYOTA
8205
MOVEMENT
1st Position
2nd Position