Subscribe to Our Youtube Channel
Related Manuals for Newport Oriel Instruments 70706
Summary of Contents for Newport Oriel Instruments 70706
- Page 1 Model 70706 Photomultiplier Power Supply User's Manual Family of Brands – ILX Lightwave • New Focus™ • Ophir • Corion • Richardson Gratings™ • Spectra-Physics ® ® ® M70706, Rev A...
-
Page 2: Table Of Contents
TROUBLESHOOTING ........................10 FAULT DIAGNOSIS ......................10 DECLARATION OF CONFORMITY ....................12 WARRANTY AND SERVICE ......................13 CONTACTING NEWPORT CORPORATION ..............13 REQUEST FOR ASSISTANCE / SERVICE ................. 14 REPAIR SERVICE ....................... 14 NON-WARRANTY REPAIR ....................14 WARRANTY REPAIR ......................15... -
Page 3: Safety
European Union CE Mark The presence of the CE Mark on Newport Corporation equipment means that it has been designed, tested and certified as complying with all applicable European Union (CE) regulations and recommendations. -
Page 4: General Description
PHOTOMULTIPLIER POWER SUPPLY GENERAL DESCRIPTION The 70706 Photomultiplier Power Supplies has been specifically designed by Newport to supply the highly regulated voltage, which photomultiplier tubes (PMT's) require. The 70706 is used to supply negative voltages to -2000V and has positive ground. -
Page 5: Specifications
M70706 PHOTOMULTIPLIER POWER SUPPLY 3 SPECIFICATIONS Voltage Range (70706): -200 to -2000 Volts Outputs: 2 High Voltage BNC connectors Current Load: 2 mA Line Regulation: 0.001% Load Regulation: 0.001% Drift Stability: 0.1% / 8 hrs. Temperature Stability: 50 ppm / C Accuracy: Repeatability: 2 Volts... -
Page 6: Preparation For Use
M70706 PHOTOMULTIPLIER POWER SUPPLY 4 PREPARATION FOR USE INSPECTION Upon unpacking the power supply, inspect it for any damage, which may have occurred in transit. Save all packing materials in case the unit needs to be returned. Visually check to confirm that there are no broken controls or connectors and that the case and panel surfaces are free from dents and scratches. -
Page 7: Using The Power Supply
M70706 PHOTOMULTIPLIER POWER SUPPLY 5 USING THE POWER SUPPLY MANUAL CONTROL • DO NOT CONNECT A PMT TO A POWER SUPPLY WHEN THE SUPPLY IS SWITCHED ON!! • Make sure that the Remote Enable switch on the back panel is switched off. •... - Page 8 M70706 PHOTOMULTIPLIER POWER SUPPLY Connect this end Connect this end to to the Detector the 70706 Power Figure 1: 70097 Cable MHV to SHV plug...
-
Page 9: External Control
M70706 PHOTOMULTIPLIER POWER SUPPLY EXTERNAL CONTROL • DO NOT CONNECT A PMT TO A POWER SUPPLY WHEN THE SUPPLY IS SWITCHED ON!! • Make sure that the Remote Enable switch on the back panel is switched to Remote. • Enable/Disable Switch The high voltage output from the power supply can be switched on or off from an external source;... -
Page 10: Troubleshooting
M70706 PHOTOMULTIPLIER POWER SUPPLY 6 TROUBLESHOOTING FAULT DIAGNOSIS If operational problems are encountered, the configuration of the instrumentation should be checked before the power supply is considered defective. The following list of externally recognizable problems is provided to assist in this determination. •... - Page 11 M70706 PHOTOMULTIPLIER POWER SUPPLY Figure 2: Power Supply Features 1. Power Switch 5. Front Panel/Remote Enable/Disable Switch 2. LED Display 6. Front Panel/Remote Voltage Control Switch 3. Voltage Control Knob 7. 120/240V AC Line Selection/Fuse Location 4. Dual High Voltage Outputs...
-
Page 12: Declaration Of Conformity
Bruno Rety Authorized to compile technical Domenic Assalone documentation Site Manager, Oriel Products Group Director, PPT Instrument and Motion Division Europe Micro-Controle Division of Newport 150 Long Beach Boulevard Corporation Stratford, CT 06615 Zone Industrielle 45340 Beaune la Rolande, France... -
Page 13: Warranty And Service
Oriel Instruments belongs to Newport Corporation's family of brands. Thanks to a steadfast commitment to quality, innovation, hard work and customer care, Newport is trusted the world over as the complete source for all photonics and laser technology and equipment. -
Page 14: Request For Assistance / Service
Newport's discretion. Newport is not responsible for damage occurring in transit. The Owner of the product bears all risk of loss or damage to the returned Products until delivery at Newport’s facility. Newport is not responsible for product damage once it has left the facility after repair or replacement has been completed. -
Page 15: Warranty Repair
Except as otherwise expressly stated in Newport’s quote or in the current operating manual or other written guarantee for any of the Products, Newport warrants that, for the period of time set forth below with respect to each Product or component type (the "Warranty Period"), the Products sold hereunder will be free from defects in material and workmanship, and will conform to the applicable specifications, under normal use and service when correctly installed and maintained. -
Page 16: Loaner / Demo Material
The Newport programs and all materials furnished or produced in connection with them ("Related Materials") contain trade secrets of Newport and are for use only in the manner expressly permitted. Newport claims and reserves all rights and benefits afforded under law in the Programs provided by Newport Corporation.
Need help?
Do you have a question about the Oriel Instruments 70706 and is the answer not in the manual?
Questions and answers