Table of Contents
Advertisement
46
SEATS AND RESTRAINTS
3. Press and release SET; a beep will
sound.
4. Immediately press and hold the 1
or 2 memory button matching the
above DIC welcome message until
two beeps sound.
If too much time passes between
releasing SET and pressing 1, the
memory position will not be saved
and two beeps will not sound.
Repeat Steps 3 and 4.
1 or 2 corresponds to the driver
number. See Identifying Driver
Number previously in this section.
5. Repeat Steps 1 4 for a second
driver using 1 or 2. Remote keys 3
8 may not save memory positions.
To save the position for
Exit Memory features, repeat Steps 1
4 using
. This saves the position for
getting out of the vehicle.
Save preferred memory feature
positions to both 1 and 2 if you are
the only driver.
Manually Recalling Memory
Positions
Press and hold 1, 2, or
previously saved memory positions if
you are driver 1 or 2 identified in the
DIC welcome message. Remote keys
3 8 will not recall memory positions.
To stop Manual Memory recall
movement, release 1, 2, or
any of the following controls:
Power seat
Memory SET
Power mirror, with the driver or
passenger side mirror selected
Power steering wheel, if equipped
Manual Memory recall movement for
1, 2 or
and Seat
and will complete to the saved
memory position if the vehicle is
shifted in or out of P (Park).
Seat Entry Memory
The vehicle identifies the number of
the current driver s remote key (1 8).
See Remote Keyless Entry (RKE) System
Operation 0 7. If the remote key is 1 or
2, and Seat Entry Memory is enabled
in vehicle personalization, the
to recall the
or press
buttons may be initiated
positions saved to the same memory
button number 1 or 2 are
automatically recalled when the
vehicle is turned on, or turned from
off to ACC/ACCESSORY. Remote keys
3 8 will not provide automatic
memory recalls.
To turn Seat Entry Memory on or off,
see Vehicle Personalization Settings
previously in this section and Vehicle
Personalization 0 133.
The shift lever must be in P (Park) to
start Seat Entry Memory. Seat Entry
Memory recall will complete if the
vehicle is shifted out of P (Park) prior
to reaching the saved memory
position.
To stop Seat Entry Memory recall
movement, turn the vehicle off or
press any of the following controls:
Power seat
Memory SET, 1, 2, or
Power mirror, with the driver or
passenger side mirror selected
Power steering wheel, if equipped
If the saved memory seat position
does not automatically recall or recalls
to the wrong positions, the driver s
Advertisement
Chapters
Table of Contents
