Table of Contents
Advertisement
Show Terrain in 3D (Default is
Off) : If equipped, touch On or Off.
When turned on, the system will
display terrain information on the
map in 3D view.
Auto-Zoom (Default is On) : Touch
On or Off. When turned on, the
system will automatically adjust the
zoom level when the vehicle is
approaching a turn. After the turn is
completed, the system automatically
brings the zoom back to the originally
set level. If the vehicle is approaching
a turn with the next turn occurring
shortly after, the Auto-Zoom will
remain on until both turns are
completed.
Preferred Route
To access, touch Settings, then More
Settings, and then Preferred Route.
Choose from two different route
options: Fastest or Eco-Friendly.
Fastest would be the route with the
shortest drive time.
Eco-Friendly would be the most
fuel-efficient route.
Avoid on Current Route
To access, touch Settings, and then
Avoid on Current Route.
Choose any of the road features to
avoid while on route:
Highways
Unpaved Roads
Ferries
Carpool Lanes
Toll Roads
Tunnels
Country Borders
Range Projection (Electric Vehicles)
Range Projection allows the vehicle s
electric driving range to be checked at
that moment.
Touch the Range Projection icon to
display the map screen with a range
indicator.
Navigation Voice Control
Touch to access the voice control
setting display.
Navigation Volume
To adjust the
volume level, use the sliding bar on
the Navigation screen. If the voice
guidance prompt is being heard,
INFOTAINMENT SYSTEM
volume can also be adjusted using
the knob on the center stack or the
volume switch on the steering
wheel.
Navigation Voice Prompt Level
during a Call. Options available are:
Full Prompt (Selected by default)
Tone Only
None
Traffic Events (If Equipped)
This feature provides a list of events
that are on the route or nearby. Touch
A
and then select Traffic Events. An
OnStar connected Navigation service
plan is required.
Traffic Preferences (If Equipped)
While in Map View, touch
Settings, then More Settings, and then
Map and Navigation Settings to access
Traffic Preferences. When Show
Traffic on Map is turned on, the
feature provides an overview of the
traffic flow using different coded
colors. The following options are
available for rerouting:
177
A
, then
Advertisement
Chapters
Table of Contents
