Huawei SUN2000-100KTL-USH0 User Manual page 56

SUN2000-100KTL-USH0
User Manual
No. Cable
4 PV side
ground cable
5 DC input
power cable
● The AC output power cable can be an aluminum alloy cable with a conductor
● The MC4 terminals delivered with the SUN2000 only support the 8 AWG DC
● The DC input power cable can be a 10 AWG cable. MC4 terminals should be
Issue 06 (2020-12-18)
Type
are advised to use
four single-core
outdoor copper
cables (L1, L2, L3,
and PE) and M8
OT terminals (PE).
You do not need to
prepare a PE cable.
Single-core outdoor
copper cable and M6 OT
terminal
PV cable that meets the
1500 V standard
NO TICE
cross-sectional area of 1–3/0 AWG.
input power cable. Using cables of other specifications may result in serious
consequences. The caused device damage is not covered under any warranty or
service agreement.
prepared by the customer (male connector: PV-KBT4/6II-UR; female connector:
PV-KST4/6II-UR). Using other terminals may result in serious consequences. The
caused device damage is not covered by any warranty.
Copyright © Huawei Technologies Co., Ltd.
Conductor Outer
Cross-Sectional Diameter
Area Range
≥ 6 AWG N/A
8 AWG 6.05–8.56 mm
(0.24–0.34 in.)
5 Electrical Connections
Source
Prepared
by the
custome
r
Prepared
by the
custome
r
48