GMC CHEVROLET Silverado 1500 2021 Owner's Manual page 86

1.1. Find the lower anchors for the
desired seating position.
1.2. Put the child restraint on the seat.
1.3. Attach and tighten the lower
attachments on the child restraint
to the lower anchors.
2. For forward-facing child restraints, attach
and tighten the top tether to the top
tether anchor, if your vehicle has one.
Follow the child restraint instructions and
the vehicle LATCH anchor weight limits
described at the beginning of this
section, and the following steps:
Rear Driver Side Position
Rear Driver Side Position
2.1. For a top tether in the rear driver
side position:
2.1.1. Remove the driver side head
restraint and center
headrest. See Head
Restraint or Headrest
Removal and Reinstallation
later in this section.
Seats and Restraints
2.1.2. For first time use, remove
and discard the rubber band
from the top tether loop (2).
2.1.3. Route the top tether (3)
through the loop (2).
2.1.4. Attach the top tether (3) to
the driver side of the center
top tether metal anchor (1).
2.1.5. Make sure the child restraint
top tether hook is
completely closed and
secured to the top tether
anchor.
85