Table of Contents
Advertisement
S
E
R
I
E
S
Product Overview
The CS7 is an ultra-compact, powered, intelligent, line array enclosure designed for medium throw applications. It contains
two symmetrically arrayed 7" LF transducers, and a 3" HF compression driver mounted onto an Adamson waveguide. The
high frequency waveguide is designed to couple multiple cabinets across the entire intended frequency band without loss of
coherence.
Each CS7 cabinet houses proprietary Class-D Amplification and comprehensive internal signal processing including Milan-ready
AVB connectivity. Internal switch fabric allows multiple enclosures to be daisy-chained in order to reduce the required amount
of cabling in complex system setups.
The operational frequency range of the CS7 is 80Hz to 18kHz. The use of proprietary technologies such as Controlled Summation
Technology and Advanced Cone Architecture allow high maximum SPL and maintains a consistent nominal horizontal dispersion
pattern of 100° down to 400Hz.
The enclosure is made of marine grade birch plywood, with an integrated aluminum and steel four-point rigging system. Without
sacrificing low resonance to composite material, the CS7 weighs only 17.5 kg / 38.6 lbs.
Up to sixteen CS7 can be flown in the same array when using the Ultra-Compact Support Frame (930-0025) and up to eight
when using the Ultra-Compact Micro Frame (930-0027). Nine rigging positions are available, allowing vertical inter-cabinet
splay angles from 0° to 12.5°. Always consult Adamson CS Software and the CS-Series Line Array Rigging Manual for correct
rigging positions and proper rigging instructions.
The CS7 is intended to be used as a standalone system or with other CS-Series products and is designed to pair easily and
coherently with all CS-Series subwoofers.
User Manual
6
Advertisement
Table of Contents
