Placement - Philips 8000 Series User Manual

• If the Remote Control is operated near
other products which generate infrared
rays, or if other remote control devices
using infra-red rays are used near the unit,
it may operate incorrectly. Conversely, the
other products may operate incorrectly.
First-time use:
The unit has a pre-
installed lithium CR2025
battery. Remove the
protective tab to
activate the remote
control battery.
Replace the Remote Control Battery
The remote control requires a CR2025, 3V
Lithium battery.
1
Use tools (such as coin batteries/coins) to
catch the groove of the battery box cover
and turn counter-clockwise to
2
Remove the old battery, which is located in
the lid, place the new CR2025 battery and
pay attention to the correct polarity (+/-).
3
Use the tools to catch the groove of the
battery compartment cover and turn
clockwise to (lock), secure it into the
remote control.
1 2
Precautions Concerning Batteries
• When the Remote Control is not to be
used for a long time (more than a month),
remove the battery from the Remote
Control to prevent it from leaking.
•
•
•
•
•
•

Placement

Place the subwoofer at least 1 meter (3 feet)
away from your Soundbar, and ten centimeters
away from the wall.
For best results, place your subwoofer as shown
below.
(unlock).
3
If the batteries leak, wipe away the leakage
inside the battery compartment and
replace the batteries with new ones.
Do not use any batteries other than those
Do not heat or disassemble batteries.
Do not carry or store batteries with other
metallic objects. Doing so could cause
batteries to short circuit, leak or explode.
Never recharge a battery unless it is
9