PAC BCI-CH21 Instruction Manual page 14

BCI-CH21
Common Use Examples w/Setup
Set DIP switches to the ON position to activate the corresponding features.
Set DIP switches to the OFF position for any features that are not desired.
Reverse Camera
Adding Reverse Camera Only
• DIP switch 1 = ON
• DIP switch 2 = OFF
• DIP switch 3 = OFF
• No additional programming needed as Programmable Output 1
(10A) is set to "Accessory" by default (use to power cameras)
• Need to use BCI-CH21-AUX Harness (included)
Adding Reverse Camera and Navigation Unlock
• DIP switch 1 = ON
• DIP switch 2 = ON
• DIP switch 3 = OFF
• No additional programming needed as Programmable Output 1
(10A) is set to "Accessory" by default (use to power camera)
• Need to use BCI-CH21-AUX Harness (included)
Adding Reverse Camera and VES
• DIP switch 1 = ON
• DIP switch 2 = User Preference
• DIP switch 3 = ON
• No additional programming needed as Programmable Output 1
(10A) is set to accessory by default (use to power cameras and
video source)
• Need to use BCI-CH21-AUX Harness (included)
Adding Reverse Camera and a Bed Camera using the AVS21
(sold separately)
• DIP switch 1 = ON
• DIP switch 2 = OFF
• DIP switch 3 = OFF
• PC Settings
• Blind Spot Camera = OFF.
• Front Camera = OFF
• Programmable Output 1 (10A) = Any Camera Active or
Accessory (use to power cameras)
• Programmable Output 2 (1A) = Forced Reverse Camera
(use to trigger AVS21 when the forced reverse camera
feature is triggered via the SWC or the on-demand switch)
• Programmable Output 3 (1A) = OFF
• Need to use BCI-CH21-AUX Harness (included
Pacific Accessory Corporation
Navigation Unlock
1 2
Reverse Camera Input and Navigation Unlock
Interface for Chrysler / Dodge / Jeep Vehicles
VES Activation
3
Adding Blind Spot Cameras using the VS41 (sold separately)
• DIP switch 1 = ON if adding rev cam; OFF if already equipped
• DIP switch 2 = User Preference
• DIP switch 3 = OFF
• PC Settings
• Blind Spot Camera = User Preference, can't be OFF
• Front Camera = Off
• Programmable Output 1 (10A) = Any Camera Active or
Accessory (use to power cameras)
• Programmable Output 2 = OFF
• Programmable Output 3 = OFF
• Need to use BCI-CH21 AUX Harness
Adding Blind Spot Cameras and a Front Camera using the VS41
(sold separately)
• DIP switch 1 = ON if adding reverse camera; OFF if already
equipped
• DIP switch 2 = User Preference
• DIP switch 3 = OFF
• PC Settings
• Blind Spot Camera = User Preference, can't be OFF.
• Front Camera = User Preference, can't be OFF.
• Programmable Output 1 (10A) = Any Camera Active or
Accessory (use to power cameras)
• Programmable Output 2 (1A) = OFF
• Programmable Output 3 (1A) = OFF
• Need to use BCI-CH21-AUX Harness
Adding Reverse Camera, Blind Spot Cameras, and a Front
Camera using the VS41 (sold separately), a bed camera using
the AVS21 (sold separately), Navigation Unlock, and VES
• DIP switch 1 = ON
• DIP switch 2 = ON
• DIP switch 3 = ON
• PC Settings
• Blind Spot Camera = User Preference, can't be OFF.
• Front Camera = User Preference, can't be OFF.
• Programmable Output 1 (10A) = Accessory (use to power
cameras and video source)
• Programmable Output 2 (1A) = Forced Reverse Camera
(use to trigger AVS21 when the forced reverse camera
feature is triggered via the SWC or the on-demand switch)
• Programmable Output 3 (1A) = OFF
• Need to use BCI-CH21-AUX Harness (included)
Not Used
4