Noise Protection; Kitchen Plinth Adjustment - Zanussi ZT 6810 Instruction Booklet

Noise protection

Adhesive noise protection ensures excellent noise
insulation. This should be fitted when the dishwasher
has been mounted in the recess and the height adjusted.
Apply the protection as shown in the drawing, making
sure that the non-adhesive section reaches right down to
the floor.

Kitchen plinth adjustment

To allow correct opening of the door it is sometimes
necessary to cut the kitchen plinth. Refer to the cutting
table.
According to dimensions (a) and (b) as shown on the
figure, you will find on the following table the depth (x)
of the cut to be made on the plinth.
The dimensions (a) and (b) of the table are those most
frequently used in the kitchen furnitures.
II61
II59
a
b
II15
Height (a)*
1 7 0 1 6 0 1 5 0 1 4 0 1 3 0 1 2 0 11 0 1 0 0
40
136 131 125 118 110 100 93 85
50
135 131 125 118 110 102 92 85
60 137 132 125 118 110 102 94 85
70
138 134 128 120 110 104 95 85
80 /
139 130 124 115 105 98 88
90 / /
138 129 120 110 100 90
1 0 0 / / /
(*)
dimensions in mm
Dimensions of the
cut on the plinth
31
90
75
75
75
75
78
80
135 125 115 105 95 85
600 mm
minimum
X
X
PFI17UK