Bluetooth Pairing - ifi NEO iDSD User Manual

Bluetooth pairing

From selecting the Bluetooth input, the NEO iDSD's OLED will ash searching for the previously paired device.
If it cannot nd the stored device, it will automatically enter pairing mode and ash.
To enter pairing mode, press and hold the button (for three seconds) until the Bluetooth icon ashes. To pair, nd
the iFi Hi-Res Audio Bluetooth device from the nearby devices list on your phone.
The NEO iDSD can store up to 8 paired Bluetooth devices.
4. Power On/Off
Press the power switch to power on/off the NEO iDSD.
5. Balanced 4.4mm analogue output
Connect balanced 4.4mm headphones.
Tip: As the NEO iDSD is a balanced design, we recommend the 4.4mm balanced output.
6. Single-ended 6.3mm analogue output
Connect single-ended 6.3mm headphones. With single-ended 3.5mm headphones, connect using a 3.5mm to
6.3mm adapter.
7. XLR balanced analogue output
Balanced analogue signal output to an ampli er.
6