Operating; Vacuuming - Royal Appliance International Dirt Devil Fello & Friend Bag Operating Manual

Cylinder vacuum cleaner swirl y93
Table of Contents

Advertisement

Available languages

Available languages

3 Operating

1
Fig. 9
1
*
Fig. 10

3.1 Vacuuming

3
Operating
WARNING:
Only attach the nozzles if the appliance if it is not
2
connected to the power supply. Otherwise, the appliance
could be switched on by accident.
Proceed as follows to attach the nozzles:
1. Switch off the vacuum cleaner and pull the plug from the
mains socket.
2. Pull the attached nozzle off of the telescopic tube.
3. Attach the desired nozzle to the bottom end of the
telescopic tube (Fig. 9/1) or if necessary directly to the
handle (Fig. 9/2).
NOTE:
If you want to use the "Fello" pet hair turbo brush, you
must first attach the supplied adapter (Fig. 10/*) to the
telescopic tube (Fig. 10/1). This is described in detail in
the instruction sheet for the "Fello" pet hair turbo brush.
ATTENTION:
Using the vacuum cleaner without a nozzle attached
increases the danger of accidentally sucking in objects.
4. If possible, store nozzles no longer in use on the
accessory bracket. Keep the other nozzles safe and
inaccessible to children.
.
WARNING:
Check the cylinder vacuum cleaner and the power cable
before each use. A damaged appliance must never be
used. There is a risk of injury.
ATTENTION:
Only use the cylinder vacuum cleaner if all the filters are
intact, dry and inserted correctly. Make sure that none of
the openings are blocked. Otherwise, the vacuum
cleaner can become damaged.
NOTE:
Your cylinder vacuum cleaner has an overheating
protection device. It turns off automatically if it overheats.
If this happens, then turn off the cylinder vacuum cleaner
and remove the plug. Remove the cause of overheating.
Wait approx. 45 minutes. Once the cylinder vacuum
cleaner has cooled down you can switch it on again.
27

Advertisement

Table of Contents
loading

Table of Contents