Advertisement
Quick Links
Disk Harrow
7000 Series
Table of Contents
Read the Operator's Manual entirely. When you see this symbol,
the subsequent instructions and warnings are serious - follow
without exception. Your life and the lives of others depend on it!
Cover photo may show optional equipment not supplied
with standard unit.
For an Operator's Manual and Decal Kit in another
language, please see your Land Pride dealer.
TP-69481
556-433M
Operator Manual
Printed 9/16/20
Advertisement
Related Manuals for Land Pride 7000 Series
Summary of Contents for Land Pride 7000 Series
- Page 1 Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in another language, please see your Land Pride dealer. Printed 9/16/20...
- Page 2 Machine Identification Record your machine details in the log below. If you replace this manual, be sure to transfer this information to the new manual. If you or the dealer have added options not originally ordered with the machine, or removed options that were originally ordered, the weights and measurements are no longer accurate for your machine.
- Page 3 Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
- Page 4 Parts Manual for this equipment. for Land Pride products. Download the appropriate App on your Refer to Parts Manual QR smart phone, open the App, point your Locator on this page for phone on the QR code and take a picture.
- Page 5 Be Familiar with Safety Decals Read and understand “Safety Decals” on page 4, thoroughly. Read all instructions noted on the decals. Keep decals clean. Replace damaged, faded and illegible decals. 9/16/20 7000 Series 556-433M...
- Page 6 Carry reflectors or flags to mark drill in case of breakdown on the road. Do not fold or unfold the drill while the tractor is moving. 9/16/20 7000 Series 556-433M...
- Page 7 Inspect all parts. Make sure parts are in good condition and installed properly. Remove buildup of grease, oil or debris. Remove all tools and unused parts from drill before operation. 9/16/20 7000 Series 556-433M...
- Page 8 Keep all safety decals clean and legible. Replace all damaged or missing decals. Order new decals from your Land Pride dealer. Refer to this section for proper decal placement. When ordering new parts or components, also request corresponding safety decals.
- Page 9 On rear face of light bracket mount tube (inside); 2 total 838-615C 43423 Amber Reflectors On front of light brackets. On front, outside of center frame (not shown), on outside, rear of center frame, side of finishing attachment (not shown); 8 total 9/16/20 7000 Series 556-433M...
- Page 10 Tongue rises rapidly when unhitched from tractor. Lower implement to ground before unhitching. 838-606C Warning: Tongue Rising Front od hitch (left, front); 1 total TP-69483 838-094C Warning: High Pressure Fluid Hazard On hitch, left rear; 1 total 43424 9/16/20 7000 Series 556-433M...
- Page 11 Table of Contents Important Safety Information Caution Decals 838-598C TP-69438 Caution: General Instructions On hitch, left rear; 1 total Notice Decals 838-613C Notice: Transport Lock Outside of center frame (both sides); 2 total TP-69438 9/16/20 7000 Series 556-433M...
- Page 12 Description of Unit The 7000 Series Disk Harrow is a one section primary and secondary tillage tool. Working width ranges from 10 to 15 feet. The implement is designed to cut out and bury roots and crop residue.
- Page 13 Land Pride dealer. The serial-number plate is located on front face of the main tool bar truss. Record your 7000 Series model and serial number here for quick reference: Model Number:__________________________...
- Page 14 Refold the machine slowly. Turn the fold stop valve • to the shut position to lock the fold hydraulics. Put transport locks in place. Always use the transport locks when moving from field to field and while in storage. 9/16/20 7000 Series 556-433M...
- Page 15 Before hitching, check the compatibility and capability of the towing tractor or implement. • The 7000 Series Disk Harrow is a pull-type implement equipped with a standard clevis single tang hitch. It may be converted to a Category III, IV or V hitch using optional accessory parts.
- Page 16 Refer to Figure 5 Land Pride hydraulic hoses have color coded handle grips to help you hookup hoses to your tractor outlets. Hoses that go to the same remote valve are marked with the same color.
- Page 17 Position the V-block (14) forward of the cushions and check the size of the resulting pinning hole. Remove a cushion (15) if needed. 14. Add the top plate (16). Secure from below with Grade 5 bolt (10). 9/16/20 7000 Series 556-433M...
- Page 18 Again, watch for any leaks and tighten if necessary. 19. Check the tire pressure for proper inflation and Figure 8 43411 check the tightness of lug bolts. Transport Locks Storage 9/16/20 7000 Series 556-433M...
- Page 19 2. To adjust the disk scrapers loosen the u-bolts (1) that hold the disk scrapper assembly (2) to the scraper tube (3) and move the scraper until it is about ” from the disc blade. Figure 9 TP-69483 Scraper Adjustment 9/16/20 7000 Series 556-433M...
- Page 20 Check hydraulic hoses, fittings, and cylinders for leaks. Repair or replace before going to the field. Perform all beginning-of-season and daily service items under “Maintenance” on page 25. 9/16/20 7000 Series 556-433M...
- Page 21 8. Do not exceed 20 mph (32 kph). Comply with all national, regional and local laws when traveling on public roads. 9. Remember that the implement may be wider than the towing vehicle. Allow safe clearance. 9/16/20 7000 Series 556-433M...
- Page 22 Parking jack stowed Electrical Checklist Page Verify electrical hookups solid, or connec- tor securely stowed if not using lights in field. Hydraulic System Checklist Page Check tractor hydraulic reservoir full Make hydraulic connections Inspect connections for leaks 9/16/20 7000 Series 556-433M...
- Page 23 3. If the center is running deeper because of it following the tractor in soft soil, the wings may need to be set in slightly deeper (with the eyebolts) and then the entire machine set slightly shallower (with depth stop). 9/16/20 7000 Series 556-433M...
- Page 24 Transporting the No-Till Drill Transport Locks Refer to Figure 10 4. The manual u-shaped locks will only lock the lift and should be used for machine maintenance, transport and long term storage. Figure 10 43419 Transport Lock 9/16/20 7000 Series 556-433M...
- Page 25 1 second longer than it takes to fully lift the unit. If you set it less than this it will not properly re-phase the cylinders. If you set it more than this, you may be causing damage to the seals. 9/16/20 7000 Series 556-433M...
- Page 26 10. To level your machine lower unit till blades are just off the ground, adjust the hitch turnbuckle (1) until the front and rear blades are equal distance to the ground. Figure 13 TP-69487 Hitch Turnbuckle 9/16/20 7000 Series 556-433M...
- Page 27 4 positions and will change the coil tines several degrees. 14. Rotate the locking pin (3), back to its engaged position when the desired angle is set. Figure 15 43422 Heavy Coil Tine Adjustment Lever 9/16/20 7000 Series 556-433M...
- Page 28 18. Be sure reels are installed with twisted bars oriented forward (5) as shown. Mounting in reverse (6) can damage reel in rocky soil. Figure 17 .eps 42284 Reel Direction 9/16/20 7000 Series 556-433M...
- Page 29 4. Lubricate areas listed under “Lubrication” on page 26. 5. Replace any worn, damaged, or illegible safety labels by obtaining new labels from your Land Pride dealer. 6. Always use the manual u-channel transport locks 10. Check drag bolts for looseness or excessive wear.
- Page 30 For machines stored outdoors or operating in extreme conditions bearings should be checked more often. All Turnbuckles andThreaded Adjustments Seasonally Overall Machine Maintenance; Type of Lubrication: Multipurpose Lubricant Quantity: Coat thoroughly. 9/16/20 7000 Series 556-433M...
- Page 31 27. It is the owner’s responsibility to see that all opera- tors of the Disk Harrow know the safety and operat- ing information found in this manual. 9/16/20 7000 Series 556-433M...
- Page 32 11L X 15 Load F (4) Weight (approx lbs) 5650 6100 7100 PTO H.P Req (Min) 105+ Tillage Width (7.5”) 9’ 11” 12’ 3” 14’ 7” Tillage Width (9”) 10’ 4” 11’ 9” 14’ 7” Width (Transport) 11’ 13’ 16’ 9/16/20 7000 Series 556-433M...
- Page 33 Tighten jam nut to torque specification. - 20 ORB w/jam 19-26 14-19 - 20 ORB straight 24-27 18-20 -18 JIC 16-22 12-16 -18 ORB w/jam 24-33 18-24 -18 ORB straight 9/16/20 7000 Series 556-433M...
- Page 34 Torque Values Chart Disk Gang Torque 1 ”-5 900-1100 ft-lbs (170 lbs on 6’ Cheater) Wheel Bolt Torque Values ”-20 (75-85ft-lbs) Wheel Bolt Torque Values ”-18 (80-90 ft-lbs) Wheel Bolt Torque Values ”-18 (85-100ft-lbs) 9/16/20 7000 Series 556-433M...
- Page 35 This warranty is not valid unless the unit is registered with Land Pride within 10 days from the date of the original purchase.
- Page 36 Table of Contents...
- Page 37 Table of Contents...
- Page 38 Table of Contents Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com...