8
en | Installation
3
Installation
Before starting, select the location to mount the ARD-AYCE65B.
This location should be at shoulder height.
For wall mounting, use the included mounting template as a
guide for drilling holes for mounting screws and wiring. For US
Gang Box mounting, no drilling is necessary.
Figure 3.1 Drilling & Mounting Template
Route the interface cable from the ARD-AYCE65B to the
controller. A linear type power supply is recommended.
Screw the ARD-AYCE65B to its mounting location or US gang
box.
| V 1.1 | 2009.08
Installation manual
ARD-AYCE65B
Bosch Sicherheitssysteme GmbH