Table of Contents
Advertisement
ARD-AYCE65B
5.7
Changing the Facility Code
1.
2.
3.
4.
NOTICE!
–
–
5.8
Setting the Backlight
1.
2.
3.
4.
Bosch Sicherheitssysteme GmbH
Enter Programming Mode.
Press "4" to enter Menu 4.
The Transmit LED will turn red.
Enter the new 3-digit code you wish to set as the Facility
Code
System returns to Transmit Mode
–
You will hear three beeps
–
The Program LED will turn off
–
The Transmit LED will turn red
Facility Code can be in the range of 000 to 255.
The default Facility Code is 0.
Enter Programming Mode
Press "6" to enter menu 6
The Transmit LED will turn red
Enter the appropriate option number for the backlight
option that you wish to select
"0" for always off
"1" for always on
"2" for 10 sec. backlight after a key is pressed otherwise
off
"3" for 10 sec. backlight after a key is pressed otherwise
dimmed
System returns to Transmit Mode
–
You will hear three beeps
–
The Transmit LED will turn red.
Installation manual
Reader Functionality | en
| V 1.1 | 2009.08
23
Advertisement
Table of Contents
