Switching Off The Hob; Over--Cooking Protection; Safety Cut--Out - Zanussi ZKT 662 LN Operating Instructions Manual

Ceramic built-in hob
Table of Contents

Advertisement

A horizontal line appears in the display when the resi-
dual temperature does not exceed 60 °C.
"H" appears in the display if the residual temperature
is above 60°C (see Residual Heat Indicator).
Try to switch off the cooking zone early, in or-
der to make use of the residual heat.

Switching off the hob

The appliance can be switched off at any time using
the hob ON/OFF control (1).
Over- - cooking protec-
tion
If one or more touch controls are activated for
a period longer than 20 seconds (by a pan, cut-
lery, overflowing food, etc.) the hob switches
off completely.
Safety cut- - out
If, one or more cooking zones are not switched off, the
safety cut out will be automatically oparated after a set
time (see table below).
Heating stage
1 / 2
3--4
5
6--8
9
Once the safety cut out has been activated, a horizon-
tal line appears in the display if the residual tempera-
ture is below 60°C, or «H» is shown if the residual tem-
perature is above 60°C (see Residual Heat Indicator).
In order to unlock the safety cut out, switch off the ap-
pliance with the hob ON/OFF control (1), and then
switch on again.
Heating time limitation
in hours
6
5
4
1.5
1.5
or
1
1
153

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zkt 662 h aluZkt 862 lnZkt 862 lxZkt 662 hx

Table of Contents