Dhatec Pipe Hook Premium Application Procedure Specification page 7

Document Ref: DHA415-APS-PH
Guidelines to check if the Pipe Hook is applied properly
The Pipe Hook should be positioned leveled in the pipe end before starting lifting:
The Pipe Hook must be placed completely inside the pipe until it sits firmly in the back end of the Pipe Hook:
- The Pipe Hook should be
leveled in the pipe end.
- The horizontal part must
be in full contact with the
internal surface of the
pipe.
- There should be no
distance between the
pipe and vertical part of
the Pipe Hook.
Revision: 02
Page 7 of 7