Table of Contents
Advertisement
When mounting the phone vertically, consider the phone weight for positioning the holder:
Heavier phone: the holder is positioned in the middle.
Lighter phone: the holder is positioned towards the bottom.
5. Power on / off
Make sure the smartphone is secure before powering on the stabilizer.
When battery is low, the status indicator will blink red three times every 5 seconds,
charge the stabilizer.
Power on： press and hold the function button until the status indicator turns green and the
stabilizer beeps.
Power off： press and hold the function button until the status indicator changes from a
flashing red to a solid red light and stabilizer beeps.
Note: Turn on the stabilizer only when the phone is mounted, otherwise motors might be
damaged.
Vibrating is normal for the first few seconds after turning on the stabilizer. It will
disappear when the motor's auto-adjustment is done.
6. Smartphone charging
Should you need to charge your smartphone, you can opt to connect the phone to the
stabilizer using the corresponding cable (included).
4
Heavier load
weight:
130-200g
0.29-0.44 lbs
cables
Lighter load
weight：
≤130g
< 0.29 lbs
Micro USB Port
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Smart Stabilizer and is the answer not in the manual?
Questions and answers
My Stabilizer has a blue flashing light indicating a malfunction or failure to initialise. How do I revoke this or isit totally broken?
To fix the blue flashing light issue on your Joby Smart Stabilizer, press the trigger button twice to return to the default mode. If the issue persists, ensure the stabilizer is fully charged and properly calibrated.
This answer is automatically generated