Table of Contents
Advertisement
Product setup
1. Stabilizer charging
Fully charge the battery before powering on the stabilizer for the first time.
Charge the stabilizer with the Micro USB cable.
The indicator is red in charging status. It will turn green when the battery is fully charged.
(1) Install the smartphone before powering on the stabilizer.
!
(2) When not in use, turn off the stabilizer and then remove the smartphone.
2. Insert smartphone
Stabilizer must be powered off when mounting the phone.
Smartphone holder width range : 2.2-3.3in / 57-84mm
It's recommended to remove your smartphone protective case.
Place smartphone in the holder, push it against the back of the holder and slide it
towards the side of the stabilizer.
2
Micro USB cable
5V/2A USB charger
(not included)
.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Smart Stabilizer and is the answer not in the manual?
Questions and answers
My Stabilizer has a blue flashing light indicating a malfunction or failure to initialise. How do I revoke this or isit totally broken?
To fix the blue flashing light issue on your Joby Smart Stabilizer, press the trigger button twice to return to the default mode. If the issue persists, ensure the stabilizer is fully charged and properly calibrated.
This answer is automatically generated